Fraunhofer Institute for Production Systems and Design TechnologyPublications of the last few years
The following scientific contributions were published by Fraunhofer IPK in the last calendar year. Articles from previous years can be found below.
| Jahr Year | Titel/Autor:in Title/Author | Publikationstyp Publication Type |
|---|---|---|
| 2024 | Qualitätsüberwachung eines DED-Arc/M-Prozesses für Aluminium mit einem tiefen neuronalen Netzwerk (DNN) basierend auf statistischen Merkmalen der Schweißstromsignale Neumann, Benedikt Bog Man; Biegler, Max; Gottschalk, Götz-Friedrich; Goecke, Sven-Frithjof; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | An Inherent Strain Method Using Progressive Element Activation for Fast Distortion Calculation in Directed Energy Deposition Seitz, Georg; Bantle, Patrick; Biegler, Max; Elsner, Beatrix; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Industrial Metaverse: Pioneering Remote Maintenance Solutions Yinanc, Kutay; Rosa Cencic, Maiara |
Internetbeitrag Internet Contribution |
| 2024 | Bewertung der Komplexität von Konstruktionsaufgaben Yinanc, Kutay; Konkol, Kathrin; Rosa Cencic, Maiara |
Zeitschriftenaufsatz Journal Article |
| 2024 | Konversion von relationalen Datenbanken in Ontologien Brünnhäußer, Jörg; Konietzko, Erik Paul; Zwicker, Florian |
Zeitschriftenaufsatz Journal Article |
| 2024 | Verbesserung des Verschleißschutzes einer dünnwandigen Förderschnecke mittels Additiver Fertigung und Funktional Gradierten Materialien Marquardt, Raphael |
Internetbeitrag Internet Contribution |
| 2024 | Ökobilanzierung in der additiven Fertigung - Laser- vs. Elektronenstrahl Raute, Maximilian Julius; Beret, Alexander; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Influence of liquid metal embrittlement on the failure behavior of dissimilar spot welds with advanced high-strength steel: A component study Yang, Keke; Sowada, Matthias; Olfert, Viktoria; Seitz, Georg; Schreiber, Vincent; Heitmann, Marcel; Hein, David; Biegler, Max; Jüttner, Sven; Rethmeier, Michael; Meschut, Gerson |
Zeitschriftenaufsatz Journal Article |
| 2024 | Methoden zur Beschleunigung von FEM-Simulationen von Directed Energy Deposition Seitz, Georg |
Zeitschriftenaufsatz Journal Article |
| 2024 | Life cycle assessment in additive manufacturing of copper alloys - comparison between laser and electron beam Raute, Maximilian Julius; Beret, Alexander; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Enabling digitally integrated product design and production through digital continuity and feedback to design Tschiltschke, Till; Manoury, Marvin Michael; Riedelsheimer, Theresa; Lindow, Kai |
Zeitschriftenaufsatz Journal Article |
| 2024 | Improved Contact Stability for Admittance Control of Industrial Robots with Inverse Model Compensation Kangwagye, Samuel; Haninger, Kevin; Haddadin, Sami; Oh, Sehoon |
Konferenzbeitrag Conference Paper |
| 2024 | Combining Sampling- and Gradient-based Planning for Contact-rich Manipulation Rozzi, Filippo; Roveda, Loris; Haninger, Kevin |
Konferenzbeitrag Conference Paper |
| 2024 | Soft finger rotational stability for precision grasps Jang, Hun; Petrichenko, Valentyn; Bae, Joonbum; Haninger, Kevin |
Konferenzbeitrag Conference Paper |
| 2024 | Development and Validation of a Screw Interlock Recognition Method based on Logistic Regression Jaya, Tanureza; Bastidas Cruz, Arturo; Krüger, Jörg |
Zeitschriftenaufsatz Journal Article |
| 2024 | Ökobilanzierung zeigt Potenziale der additiven Fertigung Raute, Maximilian Julius; Müller, Vinzenz |
Zeitschriftenaufsatz Journal Article |
| 2024 | Energieeffizienzsteigerung mit IoT-basiertem Monitoringsystem Uhlmann, Eckart; Polte, Julian; Geisert, Claudio |
Zeitschriftenaufsatz Journal Article |
| 2024 | Ökobilanzierung offenbart Potenziale der additiven Fertigung Raute, Maximilian Julius; Müller, Vinzenz |
Zeitschriftenaufsatz Journal Article |
| 2024 | Planning of Time-Efficient Trajectories for Mobile Robots with Differential-Drives Lelidis, Philipp; Vick, Axel |
Konferenzbeitrag Conference Paper |
| 2024 | Integrating PLCs and Robots into the ROS 2 Ecosystem Chemnitz, Philipp Axel Moritz; Schorn, Hendrik; Töreki, Kolos; Fritz, Artur |
Konferenzbeitrag Conference Paper |
| 2024 | Hochleistungs-Lichtbogenschweißen von dicken Stahlblechen mit elektromagnetischer Schweißbadunterstützung Akyel, Fatma; Gook, Sergej; Üstündag, Ömer; Bakir, Nasim; Brunner-Schwer, Christian; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2024 | Schweißeinrichtung zum Fügen eines verdeckten Stoßes Brunner-Schwer, Christian; Biegler, Max; Rethmeier, Michael |
Patent |
| 2024 | Detektion von Bindefehlern beim DED-Arc Neumann, Benedikt Bog Man; Biegler, Max; Goecke, Sven-Frithjof; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Vorrichtung und Verfahren zur automatisierten, dreidimensionalen Bauwerksdatenmodellierung Mönchinger, Stephan; Fan, Qinyuan; Joost, Robert |
Patent |
| 2024 | Application of AI-based welding process monitoring for quality control in pipe production Gook, Sergej; El-Sari, Bassel; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Technologieaudit zur Bewertung von Forschungs- und Technologieorganisationen Hecklau, Fabian |
Dissertation Doctoral Thesis |
| 2024 | SysML v2 for Automated Co-simulation from Systems Architecture Models Zimmermann, Thomas; Manoury, Marvin Michael; Lindow, Kai |
Konferenzbeitrag Conference Paper |
| 2024 | Verschleißschutz einer Schneckengeometrie durch funktional gradierte Materialien Marquardt, Raphael; Osayi, Jason; Kmieciak, Siegfried; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2024 | Differentiable Compliant Contact Primitives for Estimation and Model Predictive Control Haninger, Kevin; Kangwagye, Samuel; Rozzi, Filippo; Oh, Sehoon; Roveda, Loris |
Konferenzbeitrag Conference Paper |
| 2024 | Flexibles AM ermöglicht wettbewerbsfähige Produktion Müller, Vinzenz; Fasselt, Janek Maria; Klötzer-Freese, Christian; Kruse, Tobias; Wagner, Florian |
Zeitschriftenaufsatz Journal Article |
| 2024 | AI-based welding process monitoring for quality control in large-diameter pipe manufacturing Gook, Sergej; El-Sari, Bassel; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2024 | Digital Twins within the Circular Economy: Literature Review and Concept Presentation Mügge, Janine; Seegrün, Anne; Hoyer, Tessa-Katharina; Riedelsheimer, Theresa; Lindow, Kai |
Zeitschriftenaufsatz Journal Article |
| 2024 | Qualitätssicherung beim Laser-Pulver-Auftragschweißen Lemke, Josefine |
Zeitschriftenaufsatz Journal Article |
| 2024 | Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds Prabitz, Konstantin; Antretter, Thomas; Rethmeier, Michael; El-Sari, Bassel; Schubert, Holger; Hilpert, Benjamin; Gruber, Martin; Sierlinger, Robert; Ecker, Werner |
Zeitschriftenaufsatz Journal Article |
| 2024 | KI zur Prozessüberwachung im Unterpulverschweißen El-Sari, Bassel; Gook, Sergej; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Laser Metal Deposition of Rene 80—Microstructure and Solidification Behavior Modelling † Srinivasan, Krishnanand; Gumenyuk, Andrey V.; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Towards anomaly detection: A feasibilty study for quality control in productions of nonwovens Lehr, Jan; Pape, Martin; Nguyen Hoang, Viet; Philipps, Jan; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2024 | Framework for identifying effective measures to improve the energy efficiency of machine tools Uhlmann, Eckart; Polte, Julian; Esser, Gero Maximilian |
Konferenzbeitrag nicht im Tagungsband Conference Paper not in Proceedings |
| 2024 | Post-Processing of Additively Manufactured Components Utilization of High-Pressure Water Jet Technology to Remove Powder Adhesions Post-Processing von additiv gefertigten Bauteilen Einsatz der Hochdruckwasserstrahltechnologie zur Entfernung von Pulveranhaftungen Kontopf, Jakob; Reder, Waldemar; Merkel, Matthias; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2024 | With synthetic data towards part recognition generalized beyond the training instances Koch, Paul; Schlüter, Marian; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2024 | Characterisation and Investigation of the Mechanical Material Properties of Recycled Glass-Fibre Reinforced Polymers for Sustainable Reusability Ludwig, Jonas; Hocke, Toni; Polte, Mitchel; Uhlmann, Eckart |
Konferenzbeitrag Conference Paper |
| 2024 | Bi-modale Augmented Reality zur Unterstützung von Montageprozessen in vernetzten Produktionsumgebungen Freydank, Erik; Schiewe, Manuel |
Zeitschriftenaufsatz Journal Article |
| 2024 | Industrial Metaverse - Mehr als Digitale Zwillinge Konkol, Kathrin |
Aufsatz in Buch Book Article |
| 2024 | Unified edge control for mobile robots based on VDA5050 and basys 4.0 - Architecture and interfaces Vick, Axel; Behling, Sebastian; Gesien, Phillip; Funk, Eugen |
Konferenzbeitrag Conference Paper |
| 2024 | Parametric study of the laser energy absorption in high-power laser beam welding Meng, Xiangmeng; Putra, Stephen Nugraha; Bachmann, Marcel; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Entwicklung und Analyse thermoelektrischer Temperiersysteme für Werkzeugmaschinen Salein, Sebastian |
Dissertation Doctoral Thesis |
| 2024 | Deformationsverhalten des elastischen Werkzeugsystems beim Bandschleifen Eiken, Michael |
Dissertation Doctoral Thesis |
| 2024 | Electron Beam Bonding: Multi-Material-Verbindungen von kohlefaserverstärkten Kunststoffen und Aluminium für Leichtbauanwendungen Yalcinyüz, Behiye Aybike |
Zeitschriftenaufsatz Journal Article |
| 2024 | Volumetric Videos in Extended Reality for enhanced Trainings in Industry Freydank, Erik; Kießling, Nora; Konkol, Kathrin |
Konferenzbeitrag Conference Paper |
| 2024 | Empowering Future Entrepreneurs: Developing an Online Entrepreneurial Mentoring Program Across Diverse EU Regions Singer-Coudoux, Katrin; Buxmann, Henry Nicolai; Will, Markus A. |
Konferenzbeitrag Conference Paper |
| 2024 | Identifizierung von Diensten für dezentralisierte Daten-Ökosysteme im Rahmen von Gaia-X Gogineni, Sonika; Tanrikulu, Cansu; Lindow, Kai; Stäbler, Maximilian |
Zeitschriftenaufsatz Journal Article |
| 2024 | Requirements for an AI driven Extended Reality assistance system for assembly tasks Konkol, Kathrin; Reusing, Hannah |
Konferenzbeitrag Conference Paper |
| 2024 | A Literature Review: The Impact of Digital Transformation on Financial Performance Kidschun, Florian; Gandhi, Aadish; Hecklau, Fabian |
Konferenzbeitrag Conference Paper |
| 2024 | Kombination des Laserhybridschweißens und UP-Engspaltschweißens für dickwandige Bauteile zur Erhöhung der Wirtschaftlichkeit Gook, Sergej; El-Sari, Bassel; Üstündag, Ömer; Gumenyuk, Andrey; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2024 | High-Speed Electrical Connector Assembly by Structured Compliance in a Finray-Effect Gripper Hartisch, Richard Matthias; Haninger, Kevin |
Zeitschriftenaufsatz Journal Article |
| 2024 | THE ENTREPRENEDU PROGRAMME: AN EDUCATIONAL AND SCALABLE MODEL FOR ENHANCING THE EUROPEAN ENTREPRENEURIAL ECOSYSTEMS Roscani, Valerio; Scatena, Lorenzo; Lombardi, Eleonora; Barlas, Achilleas; Emmanouil, Marios; Buxmann, Henry Nicolai; Singer-Coudoux, Katrin |
Konferenzbeitrag Conference Paper |
| 2024 | Energy efficiency measures for metal forming using hydraulic and mechanical presses Preuß, Mandy; Thiele, Gregor; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2024 | Insights of Anomaly Detection: How does Polluted Training Data Influence Performance? Lehr, Jan; Pape, Martin; Günther, Samuel; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2024 | Additive Manufacturing of Dental Implants Development of an Innovative Additive-Subtractive Process Chain for Dentistry Using the Laser Powder Bed Fusion Process Additive Fertigung von Zahnimplantaten Entwicklung einer innovativen additiv-subtraktiven Prozesskette für die Zahnmedizin mittels Laser Powder Bed Fusion-Verfahren Abu-Gharbieh, Malek; Braun, Thomas; Schwitalla, Andreas Dominik; Akhmad, Rafik; Frieß, Fabian; Barvinska, Valeria; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2024 | Modellbasierte Planung urbaner Refabrikationsmanufakturen Schliephack, Wolf |
Dissertation Doctoral Thesis |
| 2024 | Outer-Loop Admittance and Motion Control Dual Improvement via a Multi-Function Observer Samuel, Kangwagye; Haninger, Kevin; Oboe, Roberto; Oh, Sehoon |
Zeitschriftenaufsatz Journal Article |
| 2024 | Optimizing Human-Robot Collaboration in Industry 5.0: A Comparative Study of Communication Mediums and Their Impact on Worker Well-being and Productivity Karbouj, Bsher; Schuster, Per Sören Tobias; Blumhagen, Moritz; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2024 | Integrated Consideration of Data Flows and Life Cycle Assessment in Vehicle Dismantling processes Mügge, Janine; Seegrün, Anne; Faßbender, Lynn; Riedelsheimer, Theresa; Staufenbiel, Philip; Lindow, Kai |
Zeitschriftenaufsatz Journal Article |
| 2024 | Navigating Dualities: A Literature Review of the Role of Organizational Learning in Fostering Ambidexterity Singer-Coudoux, Katrin; Kretschmer, Maria; Houssni, Karim Alexander |
Konferenzbeitrag Conference Paper |
| 2024 | Interoperability Challenges of a Digital Product Passport System Gering, Patrick; Knothe, Thomas |
Konferenzbeitrag Conference Paper |
| 2024 | Development of an IALF Overarching Learning Module for Circular Economy Barth, Jonas; Ruzicic, Nada; Mennenga, Mark; Panagiotopoulou, Vasiliki C.; Wolf, Matthias; Ayroa, Ricardo Vega; Sattari, Massoud; Köppe, Gesine; Weyand, Astrid; Seyfried, Stefan; Mangers, Jeff; Thiede, Sebastian; Niemeyer, Jan Felix; Khoulenjani, Zahra Ghazanfarpour; Petrusch, Natalie; Metternich, Joachim; Weigold, Matthias; Herrmann, Christoph; Hummel, Vera; Braun, Anja Tatjana; Stavropoulos, P. |
Konferenzbeitrag Conference Paper |
| 2024 | Was macht einen digitalen Zwilling aus? Lindow, Kai; Tanrikulu, Cansu |
Zeitschriftenaufsatz Journal Article |
| 2024 | A fundamental study of physical mechanisms of wineglass-shaped fusion zone profile in laser melting Meng, Xiangmeng; Putra, Stephen Nugraha; Bachmann, Marcel; Yang, Fan; Artinov, Antoni; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Abrichten beim Doppelseitenplanschleifen Uhlmann, Eckart; Muthulingam, Arunan |
Zeitschriftenaufsatz Journal Article |
| 2024 | Effect of the heat treatment on the microstructure of carbide tool electrodes for electrical discharge drilling Camin, B.; Dinh, C.; Streckenbach, J.; Gille, M.; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2024 | A Perturbation-Robust Framework for Admittance Control of Robotic Systems with High-Stiffness Contacts and Heavy Payload Samuel, Kangwagye; Haninger, Kevin; Oboe, Roberto; Haddadin, Sami; Oh, Sehoon |
Zeitschriftenaufsatz Journal Article |
| 2024 | Konzeption eines digitalen Zwillings für die Produktentstehung in der Luftfahrtindustrie Brünnhäußer, Jörg; Jurczok, Christoph; Zimmermann, Thomas; Larusch, Terence; Kenfack Zangue, Renaud; Böhnke, Jacob; Lünnemann, Pascal; Lindow, Kai |
Konferenzbeitrag Conference Paper |
| 2024 | Image-Based Incremental Learning for Part Recognition of Used Automotive Cores in Reverse Logistics Briese, Clemens; Chavan, Vivek Prabhakar; Schlüter, Marian; Lehr, Jan; Kröger, Ole |
Konferenzbeitrag Conference Paper |
| 2024 | Automated 2D-3D-Mapping and Assessment of Defects Obtained from 2D Image Detection on a 3D Model for Efficient Repair of Industrial Turbine Blades Joost, Robert; Mönchinger, Stephan; Engeländer, Lukas; Lindow, Kai |
Konferenzbeitrag Conference Paper |
| 2024 | Development of a Damped Toolholder for Vibration-Assisted High-Precision Milling Using High Damping Metals Tschöpel, Julius; Hocke, Toni; Polte, Mitchel; Fleiner, Bernfried; Dicke, Clemens; Uhlmann, Eckart |
Konferenzbeitrag Conference Paper |
| 2024 | Tailoring Entrepreneurial Education: Demand-Driven Insights for an Entrepreneurial Online Mentoring Program Buxmann, Henry Nicolai; Singer-Coudoux, Katrin; Houssni, Karim Alexander |
Konferenzbeitrag Conference Paper |
| 2024 | Rheological properties of abrasive magnetorheological fluids for immersed tumbling processes Sordon, Fabian; Lahoda, Christian; Uhlmann, Eckart; Maas, Jürgen |
Konferenzbeitrag Conference Paper |
| 2024 | Incorporating sustainability into product lifecycle management: a systematic literature review Seegrün, Anne; Hardinghaus, Louis; Riedelsheimer, Theresa; Lindow, Kai |
Zeitschriftenaufsatz Journal Article |
| 2024 | Prozesskettenentwicklung für die Replikation und die Qualifizierung komplexer Mikrobauteile mit mikrooptischen Funktionsstrukturen Hein, Christoph |
Dissertation Doctoral Thesis |
| 2024 | Schneestrahltechnologie im Refurbishment-Prozess Polte, Julian; Burgdorf, Philipp; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2024 | Automatisiertes Post-Processing Uhlmann, Eckart; Polte, Julian; Neuwald, Tobias; Esser, Gero Maximilian |
Zeitschriftenaufsatz Journal Article |
| 2024 | Sustainable Product Lifecycle Management - Implementation of a Digital Twin of a Biologically Transformed Product-Ecosystem Wehking, Sebastian; Seegrün, Anne; Riedelsheimer, Theresa; Lindow, Kai |
Zeitschriftenaufsatz Journal Article |
| 2024 | Digitally integrated sustainability assessment of design characteristics - A systematic review Tschiltschke, Till; Riedelsheimer, Theresa; Lindow, Kai |
Konferenzbeitrag Conference Paper |
| 2024 | Interoperability Challenges for a Corporate Interactive Situation Awareness System Knothe, Thomas; Scholz, Julia Anne; Gering, Patrick |
Konferenzbeitrag Conference Paper |
| 2024 | Comparison of Ethereum Smart Contract Analysis and Verification Methods Happersberger, Vincent; Jäkel, Frank-Walter; Knothe, Thomas; Pignolet, Yvonne Anne; Schmid, Stefan |
Konferenzbeitrag Conference Paper |
| 2024 | Steigerung der Effizienz von Glattdrückprozessen Uhlmann, Eckart; Polte, Mitchel; Hocke, Toni; Wendt, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Investigation on stereo-ToF data fusion for the inspection of used industrial parts Krumpek, Oliver; Schlüter, Marian; Hügle, Johannes |
Konferenzbeitrag Conference Paper |
| 2024 | Value co-creation through digital twins in decentralized data ecosystems Tanrikulu, Cansu; Berg, Henning; Konietzko, Erik Paul; Cencic, Maiara Rosa; Lindow, Kai |
Konferenzbeitrag Conference Paper |
| 2024 | Developing Digital Twins for energy efficiency in the production phase of products Wehking, Sebastian; Riedelsheimer, Theresa; Tanrikulu, Cansu; Lindow, Kai |
Zeitschriftenaufsatz Journal Article |
| 2024 | Agile Produktentwicklung: Identifikation von Architekturkomponenten im Kontext fertigungsspezifischer Use Cases Larusch, Terence |
Zeitschriftenaufsatz Journal Article |
| 2024 | Numerical studies of magnetohydrodynamic technology in suppressing process porosity during laser beam welding Yang, Fan; Meng, Xiangmeng; Putra, Stephen Nugraha; Bachmann, Marcel; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Comparative Performance Evaluation of One-Stage and Two-Stage Object Detectors for Screw Head Detection and Classification in Disassembly Processes Karbouj, Bsher; Topalian-Rivas, Garabet A.; Krüger, Jörg |
Zeitschriftenaufsatz Journal Article |
| 2024 | Process strategies for optimizing the cooling behaviour of laser-welded Tailor Welded Blanks made of advanced high strength steels (AHSS) Lemke, Josefine; Höfemann, Matthias; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2024 | Numerical chip formation analysis during high-pressure cooling in metal machining Uhlmann, Eckart; Barth, Enrico; Bock-Marbach, Benjamin; Kuhnert, Jörg |
Zeitschriftenaufsatz Journal Article |
| 2024 | Recycling von Aluminium-Bronzespänen für die additive Fertigung mittels Laser-Directed Energy Deposition Klötzer-Freese, Christian; Kruse, Tobias; Müller, Vinzenz; Fasselt, Janek Maria |
Konferenzbeitrag Conference Paper |
| 2024 | Data augmentation for inertial sensor based human action recognition using deep learning Kuschan, Jan; Filaretov, Hristo; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2024 | Technology Audit: Results of the Assessment of the Technological Maturity of Brazilian Innovation Institutes Hecklau, Fabian; Will, Markus A.; Kidschun, Florian; Kohl, Holger; Pavim, Alberto; Böhm, Julius Lukas |
Konferenzbeitrag Conference Paper |
| 2024 | Assistenzgrad in der digital assistierten Montageplanung am Beispiel der Fahrzeugendmontage Bußwinkel, Ludger |
Dissertation Doctoral Thesis |
| 2024 | Additive Manufacturing enabling advanced tool, die and mold making. Market and technology report 2022 Uhlmann, Eckart; Polte, Julian; Domingos, David Carlos; Neuwald, Tobias; Fasselt, Janek Maria; Reis de Ascencao, Gustavo; Baumgarten, Jeannette |
Bericht Report |
| 2024 | Graph-based Parameter Management for Configuration Controlled Multi-level Modeling of Cyber-physical Systems Zimmermann, Thomas C.; Konietzko, Erik Paul; Lindow, Kai |
Konferenzbeitrag Conference Paper |
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica
This list has been generated from the publication platform Fraunhofer-Publica
2023
| Jahr Year | Titel/Autor:in Title/Author | Publikationstyp Publication Type |
|---|---|---|
| 2023 | Process advantages of laser hybrid welding compared to conventional arc-based welding processes for joining thick steel structures of wind tower Brunner-Schwer, Christian; Üstündag, Ömer; Bakir, Nasim; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | Laserstrahlhybridschweissen von Türmen für Windkraftanlagen - Ökonomische und ökologische Vorteile Üstündag, Ömer; Bakir, Nasim; Brunner-Schwer, Christian; Knöfel, Frieder; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael |
Aufsatz in Buch Book Article |
| 2023 | Wire Electron Beam Additive Manufacturing von niedriglegierten Zinnbronzen – Erreichbare Bauteileigenschaften und Prozessmerkmale Raute, Maximilian Julius; Seitz, Georg; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2023 | Tailor Welded Blanking Digital Weber, Joshua; Daniel, González; Höfemann, Matthias; Joos, Paul; Rys, Anastasia; Lemke, Josefine |
Zeitschriftenaufsatz Journal Article |
| 2023 | Laser-Pulver-Auftragschweißen von funktional gradierten Materialien auf Cobalt-Chrom Basis Marquardt, Raphael; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2023 | Fraunhofer IPK reports research on functionally graded materials in Additive Manufacturing Marquardt, Raphael |
Internetbeitrag Internet Contribution |
| 2023 | Kosteneinsparung in der Schweißtechnik Seitz, Georg |
Internetbeitrag Internet Contribution |
| 2023 | Application of Hybrid Laser Arc Welding for Construction of LNG Tanks Made of Thick Cryogenic 9% Ni Steel Plates Gook, Sergej; El-Batahgy, Abdel-Monem; Gumenyuk, Andrey; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | The Identification of a New Liquid Metal Embrittlement (LME) Type in Resistance Spot Welding of Advanced High-Strength Steels on Reduced Flange Widths Yang, Keke; Meschut, Gerson; Seitz, Georg; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | Werkzeug zur datenbasierten kontinuierlichen Verbesserung (KVP) in produzierenden Unternehmen Neumann, Konstantin; Oertwig, Nicole |
Zeitschriftenaufsatz Journal Article |
| 2023 | Mit Gaia-X Europas digitale Zukunft gestalten Tanrikulu, Cansu; Rosa Cencic, Maiara |
Zeitschriftenaufsatz Journal Article |
| 2023 | Künstliche Neuronale Netze zur Qualitätsprognose von Funktional Gradierten Materialien im laserbasierten Directed Energy Deposition Marquardt, Raphael; Bähring, Stefan; Biegler, Max; Rethmeier, Michael |
Paper |
| 2023 | Verbesserung der Übertragbarkeit eines künstlichen neuronalen Netzes zur Qualitätsvorhersage beim Widerstandspunktschweißen von hochfesten Stählen El-Sari, Bassel; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2023 | Laserstrahlauftragschweißen - Einfluss von Schutzgasgemischen auf die Bauteilqualität Kampffmeyer, Dirk; Wolters, Michael; Raute, Julius; Müller, Vinzenz; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2023 | Optimization of Segmented Thermal Barrier Coatings (s-TBCs) for High-Temperature Applications Yalcinyüz, Behiye Aybike; Kamutzki, Franz; Gurlo, Aleksander; Rupprecht, Christian |
Zeitschriftenaufsatz Journal Article |
| 2023 | Conception and Requirements Identification of Gaia-X-Based Service Offerings Tanrikulu, Cansu; Gogineni, Sonika; Kondak, Konstantin; Lindow, Kai |
Konferenzbeitrag Conference Paper |
| 2023 | Ontology Based Skill Matchmaking Between Contributors and Projects in Open Source Hardware Konietzko, Erik Paul; Gogineni, Sonika |
Konferenzbeitrag Conference Paper |
| 2023 | Process Setup and Boundaries of Wire Electron Beam Additive Manufacturing of High-Strength Aluminum Bronze Raute, Maximilian Julius; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | Werkzeuge effizient reparieren Mönchinger, Stephan; Müller, Vinzenz |
Zeitschriftenaufsatz Journal Article |
| 2023 | Sustainable product lifecycle management with Digital Twins: A systematic literature review Seegrün, Anne; Kruschke, Thomas; Mügge, Janine; Hardinghaus, Louis; Knauf, Tobias; Riedelsheimer, Theresa; Lindow, Kai |
Zeitschriftenaufsatz Journal Article |
| 2023 | Brennstoffzelle - wie sauber muss es sein? Tammer, Christoph; Schießl, Timo; Burgdorf, Philipp |
Zeitschriftenaufsatz Journal Article |
| 2023 | Semi-automatic process control for efficient refurbishment of turbine blades Uhlmann, Eckart; Polte, Julian; Mühlich, Christopher; Mönchinger, Stephan; Ebrahimi, Puya |
Konferenzbeitrag Conference Paper |
| 2023 | Feasibility study of joining of carbon fibre-reinforced polymer composites and aluminium alloys by electron beam welding for use in lightweight construction Yalcinyüz, Behiye Aybike; Brunner-Schwer, Christian; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2023 | Investigation of the LME Susceptibility of Dual Phase Steel with Different Zinc Coatings El-Sari, Bassel; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | Digital Twin for Circular Economy Mügge, Janine; Riedelsheimer, Theresa; Lindow, Kai |
Konferenzbeitrag Conference Paper |
| 2023 | PLM und Digitalisierung als grüne Wegbereiter Seegrün, Anne; Lindow, Kai; Kirsch, Lucas |
Internetbeitrag Internet Contribution |
| 2023 | Wieviel Essentials stecken in den neuen Wissensmanagement-Standards? Will, Markus; Orth, Ronald; Budde, Felix |
Zeitschriftenaufsatz Journal Article |
| 2023 | Adaptive Reparatur-Prozesskette Müller, Vinzenz; Mönchinger, Stephan; Colombo, Giovanna Fiocco; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | End-of-life decision support to enable circular economy in the automotive industry based on digital twin data Mügge, Janine; Hahn, Inka Rebekka; Riedelsheimer, Theresa; Chatzis, Johannes; Boes, Joachim |
Zeitschriftenaufsatz Journal Article |
| 2023 | Considering LCA in System Architectures of Smart-Circular PSS Kruschke, Thomas; Riedelsheimer, Theresa; Lindow, Kai |
Konferenzbeitrag Conference Paper |
| 2023 | Entwicklung eines Prozess- und Informationsmodells für das Produktlebenszyklusmanagement in der digitalen Transformation Schindlbeck, Roman |
Dissertation Doctoral Thesis |
| 2023 | A life cycle assessment of joining processes in the automotive industry, illustrated by the example of an EV battery case Brunner-Schwer, Christian; Lemke, Josefine; Biegler, Max; Schmolke, Tobias; Spohr, Sebastian; Meschut, Gerson; Eckstein, Lutz; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2023 | Towards Robot-Assisted Data Generation with Minimal User Interaction for Autonomously Training 6D Pose Estimation in Operational Environments Koch, Paul; Schlüter, Marian; Thill, Serge; Krüger, Jörg |
Zeitschriftenaufsatz Journal Article |
| 2023 | Cooling Lubricant Boundary Conditions for wet Turning Simulations Uhlmann, Eckart; Barth, Enrico; Nabbout, Kaissar; Sommerfeld, Martin; Bock-Marbach, Benjamin; Kuhnert, Jörg; Dovgal, Andrey |
Zeitschriftenaufsatz Journal Article |
| 2023 | Cooling Capacity of Oil-in-Water Emulsion under wet Machining Conditions Nabbout, Kaissar; Sommerfeld, Martin; Barth, Enrico; Uhlmann, Eckart; Bock-Marbach, Benjamin; Kuhnert, Jörg |
Zeitschriftenaufsatz Journal Article |
| 2023 | Quantitative Evaluation of Assessment Items of the Technology Audit Method for Research and Technology Organisations (RTOs) Hecklau, Fabian; Kidschun, Florian; Kohl, Holger; Böhm, Julius Lukas |
Konferenzbeitrag Conference Paper |
| 2023 | Kompensationsstrategien zur Verbesserung des thermischen Verhaltens von Industrierobotern Lubisch, Christian |
Dissertation Doctoral Thesis |
| 2023 | KI-unterstützte Weiterbildungskonzepte für den Mittelstand Orth, Ronald; Singer-Coudoux, Katrin; Peschl, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | Reinforcement Learning in der Serienfertigung. Multivariable Optimierung von Werkzeugmaschinen zur Steigerung der Energieeffizienz Can, A.; El-Rahhal, A.K.; Schulz, H.; Thiele, Gregor; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2023 | ENHANCING THE EUROPEAN ENTREPRENEURIAL ECOSYSTEM BY CLOSING THE GAP BETWEEN HIGH AND LOW/MODERATE INNOVATION REGIONS: THE ENTREPRENEDU CASE Roscani, Valerio; Scatena, Lorenzo; Lombardi, Eleonora; Barlas, Achilleas; Singer-Coudoux, Katrin; Buxmann, Henry Nicolai; Fernández, Abel |
Konferenzbeitrag Conference Paper |
| 2023 | Automatisierte Optimierung der Energieeffizienz verschalteter Anlagen durch steuernden Eingriff Thiele, Gregor |
Dissertation Doctoral Thesis |
| 2023 | Integrated Disturbance Observer-Based Robust Force Control Kangwagye, Samuel; Haninger, Kevin; Oboe, Roberto; Oh, Sehoon |
Zeitschriftenaufsatz Journal Article |
| 2023 | Digitalisation in the construction and woodwork sectors Oertwig, Nicole; Neumann, Konstantin; Kohl, Holger |
Bericht Report |
| 2023 | Prediction of Quality in Thermographic Spray Spot Applications with Machine Learning Algorithms Uhlmann, Eckart; Polte, Julian; Koutrakis, Nikolaos-Stefanos; Pyka, Lasse Stephan; Ider, Müslüm; Thomas, Georg; Rupprecht, Christian |
Zeitschriftenaufsatz Journal Article |
| 2023 | Model predictive impedance control with Gaussian processes for human and environment interaction Haninger, Kevin; Hegeler, Christian Olliver; Peternel, Luka |
Zeitschriftenaufsatz Journal Article |
| 2023 | Smarte Überwachung elektrischer Großantriebe Geisert, Claudio; Polte, Julian; Uhlmann, Eckart; Rauch, Hartmut; Brach, Karsten |
Zeitschriftenaufsatz Journal Article |
| 2023 | Enabling of Automatically Generation of Cutting Paths for Three-Dimensional Pre-Contouring with Waterjet Trimming Reder, Waldemar; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2023 | Edge Computing Software für den Zerspanungsprozess Uhlmann, Eckart; Hocke, Toni; Heper, Martin; Polte, Mitchel |
Zeitschriftenaufsatz Journal Article |
| 2023 | Laser Surface Texturing of Ti6Al4V Alloy for the Reduction of Peri-implantitis Souza Schweitzer, Luiz Guilherme De |
Dissertation Doctoral Thesis |
| 2023 | Increasing Admittance of Industrial Robots by Velocity Feedback Inner-Loop Shaping Kangwagye, Samuel; Haninger, Kevin; Oh, Sehoon |
Konferenzbeitrag Conference Paper |
| 2023 | Experimental and numerical study on grain refinement in electromagnetic assisted laser beam welding of 5754 Al alloy Yang, Chunliang; Yang, Fan; Meng, Xiangmeng; Putra, Stephen Nugraha; Bachmann, Marcel; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | Method of the Environmentally Friendly Dry Single-Pass Honing with Use of the Superimposed Low Frequency Oscillations Rozek, André; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2023 | Validation of virtual reality tools for unique aircraft interiors Konkol, Kathrin; Reusing, Hannah |
Konferenzbeitrag Conference Paper |
| 2023 | Learning Factory for Circular Economy and the Corporate Environment Petrusch, Natalie; Briese, Clemens; Lange, Annika; Oertwig, Nicole; Kohl, Holger |
Paper |
| 2023 | A General Analytical Solution for Two-Dimensional Columnar Crystal Growth during Laser Beam Welding of Thin Steel Sheets Artinov, Antoni; Karkhin, Victor A.; Meng, Xiangmeng; Bachmann, Marcel; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | Chancen und Grenzen der Anomaliedetektion Lehr, Jan |
Note |
| 2023 | Precise cutting of cemented carbide with nanopolycrystalline diamond in ductile regime Uhlmann, Eckart; Polte, Mitchel; Hocke, Toni; Polte, Casey; Polte, Julian |
Konferenzbeitrag Conference Paper |
| 2023 | Taxonomy for Biological Transformation Principles in the Manufacturing Industry Berkhahn, Magda; Kremer, Gerald; Riedelsheimer, Theresa; Lindow, Kai; Stark, Rainer |
Konferenzbeitrag Conference Paper |
| 2023 | Historical Paper Documents Rögner, Frank-Holm; Schottner, Gerhard; Grählert, Wulf; Gruber, Florian; Fuchs, Theobald; Hügle, Johannes |
Aufsatz in Buch Book Article |
| 2023 | Image-based recognition of surgical instruments by means of convolutional neural networks Lehr, Jan; Kelterborn, Kathrin; Briese, Clemens; Schlueter, Marian; Kroeger, Ole; Krüger, Jörg |
Review |
| 2023 | Transition to a Circular Economy in Europe through New Business Models: Barriers, Drivers, and Policy Making Försterling, Gabi; Orth, Ronald; Gellert, Benjamin |
Review |
| 2023 | Helical Electrodes for Electro-Discharge Drilling: Experimental and CFD-Based Analysis of the Influence of Internal and External Flushing Geometries on the Process Characteristics Uhlmann, Eckart; Polte, Mitchel; Yabroudi, Sami; Gerhard, Nicklas; Sakharova, Ekaterina; Thißen, Kai; Penske, Wilhelm |
Zeitschriftenaufsatz Journal Article |
| 2023 | Managing Change Towards the Future of Work - Clustering Key Perspectives Singer-Coudoux, Katrin; Braun, Greta; Stahre, Johan |
Konferenzbeitrag Conference Paper |
| 2023 | A Data-Driven Concept and Realization for Engineering Change Management Decision Support Pan, Yuwei |
Dissertation Doctoral Thesis |
| 2023 | Modeling the Age-related Decrease in Ballistic Limit Velocity of Polycarbonate Vision Panels Using a Johnson-Cook Material Model Coupled with Variable Failure Criteria Uhlmann, Eckart; Polte, Mitchel; Bergström, Nils; Le, Vu Ninh |
Zeitschriftenaufsatz Journal Article |
| 2023 | Implementation of a handling system for using carbon fibres as tool electrodes in micro-ED drilling Uhlmann, Eckart; Polte, Mitchel; Yabroudi, S.; Lezama Ruvalcaba, Sergio Omar |
Konferenzbeitrag Conference Paper |
| 2023 | Blue Print Plant Model. Ein Modell zur Unterstützung des Fabrikplanungsprozesses Lange, Annika; Ihnen, Deike Magret; Knothe, Thomas |
Zeitschriftenaufsatz Journal Article |
| 2023 | Capability Building Blocks for Digital Twin Development Gogineni, Sonika; Tanrikulu, Cansu; Brünnhäußer, Jörg; Lindow, Kai; Witte, Heiko |
Konferenzbeitrag Conference Paper |
| 2023 | Oberflächenfinishing additiv gefertigter Bauteile. Effizienzsteigerung durch Einsatz eines Industrieroboters beim Fliehkraftgleitschleifen Uhlmann, Eckart; Kopp, Marco; Kröger, Robin |
Zeitschriftenaufsatz Journal Article |
| 2023 | Echtzeit-Energieüberwachung in der Funkenerosion Uhlmann, Eckart; Polte, Mitchel; Yabroudi, Sami; Thißen, Kai; Penske, Wilhelm |
Zeitschriftenaufsatz Journal Article |
| 2023 | Distributed real-time production control for resilient manufacturing systems Uhlmann, Eckart; Polte, Julian; Mühlich, Christopher |
Zeitschriftenaufsatz Journal Article |
| 2023 | Recent Advances in Precision, Sustainability and Safety of Machine Tools Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2023 | Empowering End-of-Life Vehicle Decision Making with Cross-Company Data Exchange and Data Sovereignty via Catena-X Mügge, Janine; Große Erdmann, Julian; Riedelsheimer, Theresa; Manoury, Marvin Michael; Smolka, Sophie Odette; Wichmann, Sabine; Lindow, Kai |
Zeitschriftenaufsatz Journal Article |
| 2023 | Challenges in dynamic heat source modeling in high-power laser beam welding Bachmann, Marcel; Artinov, Antoni; Meng, Xiangmeng; Putra, Stephen Nugraha; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | Using ultrasonic atomization to recycle aluminium bronze chips for additive laser directed energy deposition Müller, Vinzenz; Fasselt, Janek Maria; Kruse, Tobias; Klötzer, Christian; Kleba-Ehrhardt, Rafael; Choma, Tomasz; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | Comparison of binderless carbide with conventional carbide as a cutting material for milling Uhlmann, Eckart; Hein, Christoph; Dargin, Muzaffer |
Konferenzbeitrag Conference Paper |
| 2023 | On Welding of High-Strength Steels Using Laser Beam Welding and Resistance Spot Weld Bonding with Emphasis on Seam Leak Tightness Schmolke, Tobias; Brunner-Schwer, Christian; Biegler, Max; Rethmeier, Michael; Meschut, Gerson |
Zeitschriftenaufsatz Journal Article |
| 2023 | Mechanical properties of laser welded joints of wrought and heat-treated PBF-LB/M Inconel 718 parts depending on build direction Simón Muzás, Juan; Brunner-Schwer, Christian; Hilgenberg, Kai; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2023 | Filament fabrication and subsequent additive manufacturing, debinding, and sintering for extrusion-based metal additive manufacturing and their applications: A review Bankapalli, Naveen Kumar; Gupta, Vishal; Saxena, Prateek; Bajpai, Ankur; Lahoda, Christian; Polte, Julian |
Review |
| 2023 | Eine empirische Untersuchung zur Entstehung und Nutzung von Synergiepotenzialen zwischen der Innovations- und der Qualitätsfunktion im Produktentstehungsprozess Dunst, Michael |
Dissertation Doctoral Thesis |
| 2023 | Influence of edge-deposited layers on mechanical and corrosion properties of laser beam welds of 15 mm thick AISI 2205 duplex stainless steel Straße, Anne; Gumenyuk, Andrey V.; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | Konzept und Lösungen für automatische Produktdatenverwaltung Fresemann, Carina |
Dissertation Doctoral Thesis |
| 2023 | Automated design of rotationally symmetric components with machine learning and synthetic data Brünnhäußer, Jörg; Lünnemann, Pascal; Flachmeier, Florian; Wolff, Mario |
Zeitschriftenaufsatz Journal Article |
| 2023 | Hochleistungswasserabrasivstrahlen zur Vorkonturierung von Titanaluminid Männel, Constantin |
Dissertation Doctoral Thesis |
| 2023 | Creepage Distance Estimation of Hairpin Stators Using 3D Feature Extraction Grambow, Niklas; Hinz, Lennart; Bonk, Christian; Krüger, Jörg; Reithmeier, Eduard |
Zeitschriftenaufsatz Journal Article |
| 2023 | Qualitätsorientiertes Komplexitätsmanagement am Beispiel des automobilen Konfigurationsmanagementprozesses Frisch, Alexander |
Dissertation Doctoral Thesis |
| 2023 | Characterisation and investigation of ion-implanted boron-doped single crystal diamonds as temperature sensor for ultra-precision machining Uhlmann, Eckart; Polte, Mitchel; Hocke, Toni; Thißen, K. |
Konferenzbeitrag Conference Paper |
| 2023 | Entwicklung einer datenbasierten Methodik zur Qualitätssicherung von Fahrerassistenzsystemen aus Kundenperspektive Jasper, Hendrik |
Dissertation Doctoral Thesis |
| 2023 | Methode zur Quantifizierung von Einsatzgrenzen einer zentralen und dezentralen Struktur für die Fertigungssteuerung Willeke, Nils |
Dissertation Doctoral Thesis |
| 2023 | DEM simulation of centrifugal disc finishing using smoothed particle hydrodynamics Uhlmann, Eckart; Polte, Julian; Kuche, Yves; Hocke, T. |
Konferenzbeitrag Conference Paper |
| 2023 | Conceptual Approach for a Digital Value Creation Chain Within the Timber Construction Industry - Potentials and Requirements Schramm, Nico; Oertwig, Nicole; Kohl, Holger |
Konferenzbeitrag Conference Paper |
| 2023 | Analysis of various graphite types for electrical discharge finishing Uhlmann, Eckart; Polte, Mitchel; Hocke, Toni; Thißen, Kai; Bolz, Robert; Streckenbach, J. |
Konferenzbeitrag Conference Paper |
| 2023 | Dimensions of Industrial Openness - Understanding Openness and its Implications for Sustainable Transformation Weiher, Nils; Riedelsheimer, Theresa; Lindow, Kai |
Zeitschriftenaufsatz Journal Article |
| 2023 | Transdisciplinary Setup Guide for Automated Maintenance Training Generation in Virtual Reality from Virtual Commissioning Quast, Sascha; Konkol, Kathrin |
Konferenzbeitrag Conference Paper |
| 2023 | An explorative multiple case study of smart-circular PSS - status quo in industry Kruschke, Thomas; Riedelsheimer, Theresa |
Konferenzbeitrag Conference Paper |
| 2023 | Functional Architecture for Solution Independent Realizations of Digital Continuity in System Development Manoury, Marvin Michael |
Konferenzbeitrag Conference Paper |
| 2023 | Explorative Study on Benchmarking Approaches for the Improvement of Corporate Greenhouse Gas Emissions Budde, Felix; Kidschun, Florian |
Konferenzbeitrag Conference Paper |
| 2023 | Numerical analysis of the effect of an oscillating metal vapor plume on the keyhole and molten pool behavior during deep penetration laser beam welding Yang, Fan; Meng, Xiangmeng; Putra, Stephen Nugraha; Artinov, Antoni; Bachmann, Marcel; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2023 | Künstliche Intelligenz in der Produktion. Ein Gespräch mit Prof. Dr.-Ing. Jörg Krüger über die Zukunft der Produktion Krüger, Jörg |
Zeitschriftenaufsatz Journal Article |
| 2023 | Smart Maintenance - Was ist das und was kann es? Geisert, Claudio |
Zeitschriftenaufsatz Journal Article |
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica
This list has been generated from the publication platform Fraunhofer-Publica
2022
| Jahr Year | Titel/Autor:in Title/Author | Publikationstyp Publication Type |
|---|---|---|
| 2022 | Mittels Scangineering und Schweiß-Knowhow zum reparierten Umformwerkzeug Biegler, Max; Mönchinger, Stephan; Müller, Vinzenz; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | Untersuchung zum Elektronenstrahlschweißen von additiv gefertigtem Inconel 939 Raute, Maximilian Julius; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2022 | How to Gaia-X? - Ein Vorgehensmodell zur erfolgreichen Teilnahme an interoperablen und dezentralen Datenökosystemen am Beispiel von Gaia-X Konietzko, Erik Paul; Tanrikulu, Cansu; Schwarz, Florian; Lindow, Kai; Heinbach, Christoph; Gösling, Henning; Thomas, Oliver |
Zeitschriftenaufsatz Journal Article |
| 2022 | Analyse und Nutzung von Aluminium-Bronze-Schleifstaub für das Laser-Pulver-Auftragsschweißen Müller, Vinzenz; Marko, Angelina; Kruse, Tobias; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2022 | Retaining Mechanical Properties of GMA-Welded Joints of 9%Ni Steel Using Experimentally Produced Matching Ferritic Filler Metal El-batahgy, Abdel-monem; Elkousy, Mohamed Raafat; Al-Rahman, Ahmed Abd; Gumenyuk, Andrey; Rethmeier, Michael; Gook, Sergej |
Zeitschriftenaufsatz Journal Article |
| 2022 | Additive Fertigung von Funktional Gradierten Materialien für den Verschleißschutz Marquardt, Raphael |
Internetbeitrag Internet Contribution |
| 2022 | Transferability of ANN-generated parameter sets from welding tracks to 3D-geometries in Directed Energy Deposition Marko, Angelina; Bähring, Stefan; Raute, Maximilian Julius; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | Vorrichtung und Verfahren zum Mischen von Fluiden und zum Erzeugen eines Fluidgemisches Bobusch, Bernhard; Wintering, Jens; Krüger, Oliver; Uhlmann, Eckart; Hein, Christoph; Dürre, Gregor; Brehmer, Annika |
Patent |
| 2022 | Untersuchung zum Elektronenstrahlschweißen additiv gefertigter Ni-Basis-Bauteile Raute, Maximilian Julius; Marquardt, Raphael; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2022 | Prognose von Qualitätsmerkmalen durch Anwendung von KI-Methoden beim "Directed Energy Deposition" Marko, Angelina; Bähring, Stefan; Raute, Maximilian Julius; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | Resource efficient production of car body parts - implementation of digital twins across process chains Weber, Joshua; Lemke, Josefine; Sunderkoetter, Christina; Haase, Patrick; Hoefemann, Matthias; Joos, Paul; Merklein, Marion |
Vortrag Presentation |
| 2022 | Result quality evaluation of Directed Energy Deposition Additive Manufacturing simulations with progressive simplification of transient heat-source motion Biegler, Max; Elsner, Beatrix A.M.; Neubauer, Ingo; Lemke, Josefine; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | Untersuchung zur Herstellung von Cu-Strukturen mittels Wire Electron Beam Additive Manufacturing Raute, Maximilian Julius; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2022 | Einfluss von Oberflächenbeschichtungen auf die flüssigmetallinduzierte Rissbildung beim Widerstandspunktschweißen von hochfesten Stahlfeinblechen El-Sari, Bassel; Biegler, Max; Rethmeier, Michael |
Bericht Report |
| 2022 | Laserstrahlhybridschweißen von Türmen für Windkraftanlagen Üstündag, Ömer; Bakir, Nasim; Brunner-Schwer, Christian; Knöfel, Frieder; Gook, Sergej; Rethmeier, Michael; Gumenyuk, Andrey |
Zeitschriftenaufsatz Journal Article |
| 2022 | Joining 30 mm Thick Shipbuilding Steel Plates EH36 Using a Process Combination of Hybrid Laser Arc Welding and Submerged Arc Welding Gook, Sergej; Midik, Ahmet; Biegler, Max; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | Nachhaltiger im Automobil mit TWB Lemke, Josefine; Weber, Joshua; Kompenhans, Moritz Niklas; Höfemann, Matthias; Joos, Paul |
Zeitschriftenaufsatz Journal Article |
| 2022 | More sustainable in the automobile with tailor welded blank (TWB) Lemke, Josefine; Weber, Joshua; Kompenhans, Moritz; Höfemann, Matthias; Joos, Paul |
Zeitschriftenaufsatz Journal Article |
| 2022 | Investigation of liquid metal embrittlement avoidance strategies for dual phase steels via electro-thermomechanical finite element simulation Biegler, Max; Böhne, Christoph; Seitz, Georg; Meschut, Gerson; Rethmeier, Michael |
Vortrag Presentation |
| 2022 | Funktional gradierte Materialien auf Basis von Stellite und Stahl im Laserpulver-Auftragschweißen Marquardt, Raphael; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2022 | Schweißtechnik: KI-basierte Parametrierung Baumann, Anja; El-Sari, Bassel; Fromme, Dirk |
Zeitschriftenaufsatz Journal Article |
| 2022 | Integrated weld preparation designs for the joining of L-PBF and conventional components via TIG welding Geisen, Ole; Müller, Vinzenz; Graf, Benjamin; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | Quality Prediction in Directed Energy Deposition Using Artificial Neural Networks Based on Process Signals Marko, Angelina; Bähring, Stefan; Raute, Maximilian Julius; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | Learning Demonstrator for Anomaly Detection in Distributed Energy Generation Pelchen, Timo; Thiele, Gregor; Vick, Axel; Radke, Marcel; Schade, David; Krüger, Jörg |
Paper |
| 2022 | Vorrichtung zum Beaufschlagen einer magnetorheologischen Flüssigkeit mit einem Magnetfeld, System und Verfahren zum Bearbeiten eines Werkstücks mittels der magnetorheologischen Flüssigkeit Streckenbach, Jan; Kuche, Yves; Polte, Julian; Hegger, Chritian; Lahoda, Christian; Schreiner, Valentin; Uhlmann, Eckart; Maas, Jürgen |
Patent |
| 2022 | Material-adapted and process-reliable multi-wire submerged arc welding of large-diameter pipes Gook, Sergej; El-Sari, Bassel; Biegler, Max; Rethmeier, Michael; Lichtenthäler, Frank; Stark, Michael |
Konferenzbeitrag Conference Paper |
| 2022 | Acoustic emission-based process monitoring in the milling of carbon fibre-reinforced plastics Uhlmann, E.; Holznagel, Tobias |
Zeitschriftenaufsatz Journal Article |
| 2022 | Hybrid laser-arc welding of laser- and plasma-cut 20-mm-thick structural steels Üstündag, Ömer; Bakir, Nasim; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | Simulativer Vergleich tubularer Peltierelemente Binninger, Roland; Pernau, Hans-Fridtjof; Schäfer-Welsen, Olaf; Triebel, Florian; Polte, Mitchel; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2022 | Redundancy Concepts for Real-Time Cloud- and Edge-based Control of Autonomous Mobile Robots Nouruzi-Pur, Jan; Lambrecht, Jens; Nguyen, The Duy; Vick, Axel; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2022 | Process behaviour of segmented and actuated tool electrodes for variable shaping in sinking EDM Uhlmann, Eckart; Thißen, Kai; Schulte Westhoff, Bela; Streckenbach, Jan; Ludwig, Jonas; Maas, Jürgen |
Konferenzbeitrag Conference Paper |
| 2022 | Untersuchungen zur Beeinflussung der Geometrie und Werkstoffeigenschaften laserimplantierter Werkzeugstahloberflächen sowie zum tribologischen Einsatzverhalten Spranger, Felix |
Dissertation Doctoral Thesis |
| 2022 | Characterization of Ti-6Al-4V Fabricated by Multilayer Laser Powder-Based Directed Energy Deposition Ávila Calderón, Luis Alexander; Graf, Benjamin; Rehmer, Birgit; Petrat, Torsten; Skrotzki, Birgit; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | Modularized Active Learning Solution For Labelling Text Data For Business Environment Analysis Agacayaklar, Furkan; Lange, Annika; Scholz, Julia Anne; Knothe, Thomas; Busse, Dirk |
Konferenzbeitrag Conference Paper |
| 2022 | Strategie Advanced Systems Engineering | Bericht Report |
| 2022 | Agiles Prozessmanagement mittels Ambidextrie Scholz, Julia-Anne; Lange, Annika; Knothe, Thomas; Busse, Dirk |
Zeitschriftenaufsatz Journal Article |
| 2022 | Novel Advances in Machine Tools, Tool Electrodes and Processes for High-Performance and High-Precision EDM Uhlmann, Eckart; Polte, Mitchel; Yabroudi, Sami |
Zeitschriftenaufsatz Journal Article |
| 2022 | Comparing the performance of a nested to a continuous evolution strategy with covariance matrix adaption for optimization of drilling EDM Uhlmann, Eckart; Streckenbach, Jan; Polte, Mitchel; Osmanovic, M.; Schick, F. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Improvement of Charpy impact toughness by using an AC magnet backing system for laser hybrid welding of thick S690QL steels Üstündağ, Ömer; Bakir, Nasim; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | In situ microstructure analysis of Inconel 625 during laser powder bed fusion Schmeiser, Felix; Krohmer, Erwin; Wagner, Christian; Schell, Norbert; Uhlmann, Eckart; Reimers, Walter |
Zeitschriftenaufsatz Journal Article |
| 2022 | Micro-texture dependent temperature distribution of CVD diamond thick film cutting tools during turning of Ti-6Al-4V Uhlmann, Eckart; Schröter, D.; Gärtner, Eric |
Zeitschriftenaufsatz Journal Article |
| 2022 | Deliberate Surface Treatment of Zirconium Dioxide with Abrasive Brushing Tools Hoyer, Anton; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2022 | Technology Audit - Procedure for the assessment of the technological maturity of applied R&D organizations Hecklau, Fabian; Kidschun, Florian; Kohl, Holger |
Konferenzbeitrag Conference Paper |
| 2022 | Kann Systems Engineering eine nachhaltige Produktentwicklung unterstützen Kruschke, Thomas; Kaufmann, Uwe; Lindow, Kai |
Konferenzbeitrag Conference Paper |
| 2022 | Investigation of additive manufactured tungsten carbide-cobalt tool electrodes for sinking EDM Uhlmann, Eckart; Polte, Mitchel; Hörl, Robert; Braun, Thomas; Bolz, Robert |
Konferenzbeitrag Conference Paper |
| 2022 | Towards High-Payload Admittance Control for Manual Guidance with Environmental Contact Haninger, Kevin; Radke, Marcel; Vick, Axel; Krüger, Jörg |
Zeitschriftenaufsatz Journal Article |
| 2022 | Prediction of the Roughness Reduction in Centrifugal Disc Finishing of Additive Manufactured Parts Based on Discrete Element Method Kopp, Marco; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2022 | Skalierbare Herstellung von ATMPs Gebken, Natalie; Horbelt, Jessica; Kleine-Wechelmann, Sarah; Ort, Thomas; Puls, Sebastian; Schandar, Markus; Traube, Andreas; Biermann, Ferdinand; Brandstätter, Tobias Claus; Gräfe, Stefan; Herbst, Laura; König, Niels; Schmitt, Robert; Ackermann, Heiner; Diessel, Erik; Lengen, Rolf Hendrik van; Schmidt, Andreas; Braun, Dennis; Hunger, Sandra; Werner, Michael; Boskovic, Dusan; Mendl, Alexander; Graumann, Tobias; Lachmann, Kristina; Mann, Annika; Brehmer, Annika; Dürre, Gregor; Hein, Christoph; Blache, Ulrich; Dluczek, Sarah; Dünkel, Anna; Franz, Paul; Fricke, Stephan; Tradler, Thomas |
Paper |
| 2022 | Spanbildungsmodellierung unter Berücksichtigung von in situ Dehnungsmessungen bei der Zerspanung mit geometrisch bestimmter Schneide Henze, Steffen |
Dissertation Doctoral Thesis |
| 2022 | Heat Transfer Study for Oil-in-Water Emulsion Jets Impinging onto hot Metal Surface Nabbout, Kaissar; Pasternak, Lars; Sommerfeld, M.; Bock-Marbach, Benjamin; Kuhnert, Jörg; Barth, Enrico; Uhlmann, Eckart |
Konferenzbeitrag Conference Paper |
| 2022 | Implementing a European KM Approach in a Brazilian Innovation Institute on a Remote Basis Will, Markus; Neumann, Fernanda; Orth, Ronald; Budde, Felix; Santos, Victoria |
Konferenzbeitrag Conference Paper |
| 2022 | Wasserabrasivinjektorstrahlen zum Formdrehen von Titanaluminid Flögel, Karsten |
Dissertation Doctoral Thesis |
| 2022 | Design and Validation of an Adaptive Force Control Algorithm with Parameter Estimation Unit for Electromechanical Feed Axis Sewohl, André; Norberger, Manuel; Sigg, Stefan; Schlegel, Holger; Dix, Martin |
Konferenzbeitrag Conference Paper |
| 2022 | Contact Information Flow and Design of Compliance Haninger, Kevin; Radke, Marcel; Hartisch, Richard; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2022 | Modellbasierte Prozessvorhersagen für das Bürstspanen mit gebundenem Schleifmittel. Sommerfeld, Christian |
Dissertation Doctoral Thesis |
| 2022 | Bioinspirierte Erkennung von Abweichungen: Erweiterung des Interaktiven Lagebildes um einen bionisch basierten Disruptionsmodus Lange, Annika; Gering, Patrick; Agacayaklar, Irfan Furkan; Knothe, Thomas; Busse, Dirk |
Zeitschriftenaufsatz Journal Article |
| 2022 | Modellieren von Widerstandspunktschweissungen in FE Seitz, Georg |
Vortrag Presentation |
| 2022 | Schneidkantenherstellung mittels 3D-Formschleifen. Definierte Kantenpräparation durch Formschleifprozesse Muthulingam, Arunan; Uhlmann, Eckart; Thalau, Janis |
Zeitschriftenaufsatz Journal Article |
| 2022 | Geometric Design Process Automation with Artificial Intelligence Brünnhäußer, Jörg; Lünnemann, Pascal; Bisang, Ursina Saskia; Novikov, Ruslan; Flachmeier, Florian; Wolff, Mario |
Konferenzbeitrag Conference Paper |
| 2022 | Assessment Dimensions and Items for the Evaluation of the Technological Maturity of Applied R&D Organizations Hecklau, Fabian; Kidschun, Florian; Kohl, Holger |
Konferenzbeitrag Conference Paper |
| 2022 | Harmonization of Heterogeneous Asset Administration Shells Koutrakis, Nikolaos-Stefanos; Gowtham, Varun; Pilchau, W.B.P. von; Jung, T.J.; Polte, Julian; Hähner, J.; Corici, Marius-Iulian; Magedanz, Thomas; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2022 | Maschine und Technologie für die Bahnerosion mit gasförmigem Dielektrikum zur Herstellung von Mikrostrukturen Perfilov, Ivan |
Dissertation Doctoral Thesis |
| 2022 | Einfluss prozess- und geometrieinduzierter Wärmeakkumulation auf die Werkstoffeigenschaften laserstrahlgeschmolzener metallischer Bauteile Mohr, Gunther |
Dissertation Doctoral Thesis |
| 2022 | Intellectual Capital Statement (ICS) - A Case Study from a Hungarian non-profit Joint Venture Kidschun, Florian; Hecklau, Fabian; Gábor, Nick |
Konferenzbeitrag Conference Paper |
| 2022 | A cognitive assistance system with augmented reality for manual repair tasks with high variability based on the digital twin Eversberg, Leon; Ebrahimi, Puya; Pape, Martin; Lambrecht, Jens |
Zeitschriftenaufsatz Journal Article |
| 2022 | OptTopo: Automated set-point optimization for coupled systems using topology information Thiele, Gregor; Johanni, Theresa; Sommer, David; Eigel, Martin; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2022 | Optimizing the sharpening process of hybrid-bonded diamond grinding wheels by means of a process model Uhlmann, Eckart; Muthulingam, Arunan |
Zeitschriftenaufsatz Journal Article |
| 2022 | Innovative Lösungen für die industrielle Robotik Kuhlenkötter, Bernd; Krüger, Jörg |
Editorial |
| 2022 | Hybrid Laser-Arc Welding of Thick-Walled, Closed, Circumferential Pipe Welds Üstündag, Ömer; Bakir, Nasim; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | Automated defect detection of CT projection image data using Monte Carlo simulation Uhlmann, Eckart; Hein, Christoph; Fehlhaber, Felix; Wang, Yifan; Dürre, Gregor |
Konferenzbeitrag Conference Paper |
| 2022 | Machine Learning Improves Use of Haptic Glove for Engineers in Virtual Reality Konkol, Kathrin; Geiger, Andreas; Ginzler, Tim |
Konferenzbeitrag Conference Paper |
| 2022 | Framework of an experimental setup to enable an adaptive process control based on surrogate modelling Uhlmann, Eckart; Polte, Julian; Bösing, Manuel; Schuler, Niklas |
Konferenzbeitrag Conference Paper |
| 2022 | Fundamental study on embedded displacement sensor arrays for ultrasonic-assisted ultraprecision machining Uhlmann, Eckart; Polte, Mitchel; Bulla, Benjamin; Dambon, Olaf; Dicke, Clemens; Hocke, T.; Thißen, Kai; Heper, M. |
Konferenzbeitrag Conference Paper |
| 2022 | Decomposition of a Cooling Plant for Energy Efficiency Optimization Using OptTopo Thiele, Gregor; Johanni, Theresa; Sommer, David; Krüger, Jörg |
Zeitschriftenaufsatz Journal Article |
| 2022 | Prototype tilting pad thrust bearing with novel ceramic material for harsh service environments Raeve, Karel de; Borsoi Klein, Tiago; Matthey, Björn; Schmiedel, Christian; Kraenzler, Thomas; Faulhaber, Stephan; Kailer, Andreas; Kunze, Steffen |
Paper |
| 2022 | Precision Finishing of Additive Manufactured Ti-Al-components Using Diamond Slide Burnishing Polte, Julian; Polte, Mitchel; Lahoda, Christian; Uhlmann, Eckart |
Konferenzbeitrag Conference Paper |
| 2022 | Багатодротове дугове зварювання високоміцних дрібнозернистих сталей під флюсом Gook, Sergej; El-Sari, Bassel; Biegler, Max; Rethmeier, Michael; Lichtenthäler, F.; Stark, M. |
Zeitschriftenaufsatz Journal Article |
| 2022 | Numerical investigation into cleanability of support structures produced by powder bed fusion technology Campana, Giampaolo; Uhlmann, Eckart; Mele, Mattia; Raffaelli, Luca; Bergmann, André; Kochan, Jaroslaw; Polte, Julian |
Zeitschriftenaufsatz Journal Article |
| 2022 | Gear Wheel Finishing with Abrasive Brushing Tools to Improve the Surface Quality of Tooth Flanks for the Industrial Application Gülzow, Bernhard; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2022 | High-Performance Admittance Control of an Industrial Robot via Disturbance Observer Kangwagye, Samuel; Haninger, Kevin; Oh, Sehoon |
Konferenzbeitrag Conference Paper |
| 2022 | Flexible Automatisierung mit Virtuellen Agenten Uhlmann, Eckart; Polte, Julian; Mühlich, Christopher; Lindow, Kai |
Zeitschriftenaufsatz Journal Article |
| 2022 | PLM und Digitalisierung als grüne Wegbereiter Seegrün, Anne; Lindow, Kai; Kirsch, Lucas |
Zeitschriftenaufsatz Journal Article |
| 2022 | Industrielle kraftgeregelte Schraubprozesse Bastidas Cruz, Arturo; Jaya, Tanureza; Haninger, Kevin; Krüger, Jörg |
Zeitschriftenaufsatz Journal Article |
| 2022 | Enabling of Digital Transformation Pathways by a Remote Workforce Oertwig, Nicole; Petrusch, Natalie; Kohl, Holger |
Konferenzbeitrag Conference Paper |
| 2022 | Influence of the free surface reconstruction on the spatial laser energy distribution in high power laser beam welding modeling Meng, Xiangmeng; Putra, Stephen Nugraha; Bachmann, Marcel; Artinov, Antoni; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | Surface optimization of dental implants with laser surface texturing and silver coating Uhlmann, Eckart; Brehmer, Annika; Schneider, Peter; Hein, Christoph; Souza Schweitzer, Luiz Guilherme De |
Konferenzbeitrag Conference Paper |
| 2022 | DEM simulation of centrifugal disc finishing Uhlmann, Eckart; Polte, Julian; Kuche, Yves; Landua, Fabian |
Konferenzbeitrag Conference Paper |
| 2022 | Towards an open digital thread for electric mobility Weiher, Nils; Mies, Robert; Senge, Nicolas; Gogineni, Sonika |
Konferenzbeitrag Conference Paper |
| 2022 | Robot Inference of Human States: Performance and Transparency in Physical Collaboration Haninger, K. |
Aufsatz in Buch Book Article |
| 2022 | Methodik zur modellbasierten Systemarchitekturdefinition von Smart-circular Product-Service Systems Halstenberg, Friedrich Andreas |
Dissertation Doctoral Thesis |
| 2022 | Wolframschmelzcarbidbasierte MMC-Schichten für den industriellen Einsatz im Formenbau Langebeck, Anika; Jahnke, Christian; Wünderlich, Tim; Hein, Christoph; Bohlen, Annika; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2022 | Effects on crack formation of additive manufactured Inconel 939 sheets during electron beam welding Raute, Julius; Jokisch, Torsten; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2022 | CFK-Module zur adaptronischen Kompensation thermisch induzierter Winkelverlagerungen an Werkzeugmaschinen Marcks, Philipp |
Dissertation Doctoral Thesis |
| 2022 | Residual stress assessment during cutting tool lifetime of CVD-diamond coated indexable inserts Uhlmann, E.; Hinzmann, Daniel |
Zeitschriftenaufsatz Journal Article |
| 2022 | Interoperability Challenges and Solutions within Industrial Networks Jäkel, Frank-Walter; Knothe, Thomas |
Konferenzbeitrag Conference Paper |
| 2022 | Practical Approaches for Acoustic Emission Attenuation Modelling to Enable the Process Monitoring of CFRP Machining Uhlmann, Eckart; Holznagel, Tobias; Clemens, Robin |
Zeitschriftenaufsatz Journal Article |
| 2022 | Model Predictive Control with Gaussian Processes for Flexible Multi-Modal Physical Human Robot Interaction Haninger, Kevin; Hegeler, Christian Olliver; Peternel, Luka |
Konferenzbeitrag Conference Paper |
| 2022 | Biological Transformation in process simulation for enhancing ecological sustainability indicators König, Valentina; Berkhahn, Magda; Riedelsheimer, Theresa; Plakhotnik, Denys; Stautner, Marc |
Zeitschriftenaufsatz Journal Article |
| 2022 | Synchronisierte Modularisierung in der Fertigung Torka, Jan; Kohl, Holger; Knothe, Thomas; Goppold, Jean-Paul |
Zeitschriftenaufsatz Journal Article |
| 2022 | Sharpening mechanism of extremely sharp edges for diamond micro mills Wu, Y.; He, N.; Chen, N.; Polte, Julian; Yan, B.; Li, L.; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica
This list has been generated from the publication platform Fraunhofer-Publica
2021
| Jahr Year | Titel/Autor:in Title/Author | Publikationstyp Publication Type |
|---|---|---|
| 2021 | Universal identification and control of industrial manufacturing equipment as a service Tessaro, Verena; Vick, Axel; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2021 | Mit dem Wasserabrasivstrahl in eine neue Dimension Reder, Waldemar; Uhlmann, Eckart; Anders, S. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Modeling of the wet immersed tumbling process with the Discrete Element Method (DEM) Uhlmann, Eckart; Fürstenau, J.-P.; Kuche, Yves; Yabroudi, Sami; Polte, Julian; Polte, Mitchel |
Zeitschriftenaufsatz Journal Article |
| 2021 | Verfahren zum fehlerfreien Laserstrahl-Hybridschweißen von geschlossenen Rundnähten Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2021 | Model-based Process Generation For Supporting Agile Shop Floor Management In SMEs Torka, Jan; Lange, Annika; Scholz, Julia Anne; Knothe, Thomas; Busse, Dirk |
Konferenzbeitrag Conference Paper |
| 2021 | Requirements-driven Identification and Validation of Reusable System and Development Elements Sünnetcioglu, Atakan |
Dissertation Doctoral Thesis |
| 2021 | Advances in Modeling of the Kerf Formation considering the Primary and Deflection Jets for the Abrasive Water Jet Technology Uhlmann, Eckart; Kruggel-Emden, Harald; Männel, Constantin; Barth, Enrico; Markauskas, Darius |
Zeitschriftenaufsatz Journal Article |
| 2021 | Investigation of the Extrapolation Capability of an Artificial Neural Network Algorithm in Combination with Process Signals in Resistance Spot Welding of Advanced High-Strength Steels El-Sari, Bassel; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2021 | Resilienz durch dynamisches Prozessmanagement Knothe, Thomas; Oertwig, Nicole; Woesthoff, Julia; Sala, Alessandro; Lütkemeyer, Marius; Gaal, Alexander |
Zeitschriftenaufsatz Journal Article |
| 2021 | Resilienz durch Redundanz. Cloud-und Edge-basierte Echtzeitsteuerung von autonomen mobilen Robotern Nouruzi-Pur, J.; Lambrecht, J.; Nguyen, T.D.; Vick, A.; Krüger, J. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Einsatzverhalten keramisch gebundener Gleitschleifkörper Eulitz, Alexander |
Dissertation Doctoral Thesis |
| 2021 | Systematic design and implementation of a semantic assistance system for aero-engine design and manufacturing Gogineni, Sonika; Brünnhäußer, Jörg; Lindow, Kai; Konietzko, Erik Paul; Stark, Rainer; Nickel, Jonas; Witte, Heiko |
Zeitschriftenaufsatz Journal Article |
| 2021 | Inline Measurement of Process Forces and Development of a Friction Model in Abrasive Flow Machining Roßkamp, Simon; Uhlmann, Eckart |
Aufsatz in Buch Book Article |
| 2021 | Numerical investigation on the process behavior of a closed-loop internal cooling system for turning operations Uhlmann, Eckart; Meier, P. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Digitale Unterstützung der aktiven Kundenintegration zur Optimierung der Produktentwicklung Damerau, Thomas |
Dissertation Doctoral Thesis |
| 2021 | Lessons learned in intellectual capital management in Germany between 2000 and 2020 - History, applications, outlook Bornemann, Manfred; Alwert, Kay; Will, Markus |
Zeitschriftenaufsatz Journal Article |
| 2021 | Measurement and Modeling of Contact Forces during Robot-guided Drag Finishing Uhlmann, Eckart; Kopp, Marco |
Zeitschriftenaufsatz Journal Article |
| 2021 | Generic Architecture for the Automatic Parametrization of Production Machine Assembly Programs Stephan, Philipp; Fisch, Jessica; Can, Alperen; Heimann, Oliver; Thiele, Gregor; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2021 | Ex Situ Residual Stress Analysis of Chemical Vapor Deposited Diamond Coated Cutting Tools by Synchrotron X-Ray Diffraction in Transmission Geometry Hinzmann, Daniel; Böttcher, Katrin; Reimers, Walter; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2021 | SemDaServ: A Systematic Approach for Semantic Data Specification of AI-Based Smart Service Systems Preidel, Maurice; Stark, Rainer |
Zeitschriftenaufsatz Journal Article |
| 2021 | How Pedestrians Perceive Autonomous Buses: Evaluating Visual Signals Brandenburg, Elisabeth; Kozachek, Diana; Konkol, Kathrin; Woelfel, Christiane; Geiger, Andreas; Stark, Rainer |
Konferenzbeitrag Conference Paper |
| 2021 | Benchmark Concept for Industrial Pick&Place Applications Vick, Axel; Rudorfer, Martin; Vonaśek, Vojtěch |
Konferenzbeitrag Conference Paper |
| 2021 | MBSE-Modellierung für Verhaltens- und Struktursimulation Zimmermann, Thomas |
Zeitschriftenaufsatz Journal Article |
| 2021 | The Effects of HLAW Parameters for One Side T-Joints in 15 mm Thickness Naval Steel Churiaque, C.; Sánchez-Amaya, J.M.; Porrúa-Lara, M.; Gumenyuk, A.; Rethmeier, M. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Analysis of influencing factors for the dressing process in double side face grinding Uhlmann, Eckart; Lichtschlag, Linus |
Zeitschriftenaufsatz Journal Article |
| 2021 | Knowledge transfer and engineering methods for smart-circular product service systems Halstenberg, Friedrich; Dönmez, Jasmin; Mennenga, Mark; Herrmann, Christoph; Stark, Rainer |
Zeitschriftenaufsatz Journal Article |
| 2021 | Investigation of the gap bridgeability at high-power laser hybrid welding of plasma-cut thick mild steels with AC magnetic support Üstündag, Ö.; Bakir, N.; Gumenyuk, A.; Rethmeier, M. |
Konferenzbeitrag Conference Paper |
| 2021 | Elektronenstrahl schweißt additiv gefertigte Nickel-Superlegierungen Raute, Julius; Biegler, Max; Rethmeier, Michael |
Internetbeitrag Internet Contribution |
| 2021 | Recommendations for an Open Science approach to welding process research data Fabry, C.; Pittner, A.; Hirthammer, V.; Rethmeier, M. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Data driven automatic parameter inference for robotic assembly programs Stephan, P.; Fisch, J.; Can, A.; Heimann, O.; Thiele, G.; Krüger, J. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Holistic Concept towards a Reference Architecture Model for Predictive Maintenance Uhlmann, Eckart; Polte, Julian; Koutrakis, Nikolaos-Stefanos |
Zeitschriftenaufsatz Journal Article |
| 2021 | Interaction between capabilities of Model Based Systems Engineering on sensor models Manoury, Marvin Michael; Schmidt, Simon; Stark, Rainer |
Konferenzbeitrag Conference Paper |
| 2021 | Influence of oscillating magnetic field on the keyhole stability in deep penetration laser beam welding Üstündag, Ö.; Bakir, N.; Gumenyuk, A.; Rethmeier, M. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Numerical Analysis of the Partial Penetration High Power Laser Beam Welding of Thick Sheets at High Process Speeds Artinov, A.; Meng, X.; Bachmann, M.; Rethmeier, M. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Laserstrahlschweißen von additiv gefertigten Bauteilen: Einsetzbarkeit bestehender Bewertungsvorschriften Jokisch, Torsten; Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2021 | Additive manufacturing of precision cemented carbide parts Polte, Julian; Polte, Mitchel; Lahoda, Christian; Hocke, Toni; Uhlmann, Eckart |
Konferenzbeitrag Conference Paper |
| 2021 | Conceptual Introduction of required development capabilities for Model-Based Systems Engineering Manoury, Marvin Michael; Schmidt, Simon; Zimmermann, Thomas C.; Stark, Rainer |
Vortrag Presentation |
| 2021 | Einfluss des Post-Processings auf laserstrahlgeschmolzene Bauteile am Beispiel von ß-Titanlegierungen Gerlitzky, Georg |
Dissertation Doctoral Thesis |
| 2021 | Minimum Directed Information: A Design Principle for Compliant Robots Haninger, Kevin |
Konferenzbeitrag Conference Paper |
| 2021 | Bedienung digitaler Menschmodelle zur Absicherung manueller Montagetätigkeiten durch Virtual-Reality-Interaktion Geiger, Andreas |
Dissertation Doctoral Thesis |
| 2021 | Patterns for Resilient Value Creation: Perspective of the German Electrical Industry during the COVID-19 Pandemic Neumann, Konstantin; Erp, Tim van; Steinhöfel, Erik; Sieckmann, Felix; Kohl, Holger |
Zeitschriftenaufsatz Journal Article |
| 2021 | Agiles Modellieren von Servicetätigkeiten Uhlmann, Eckart; Bösing, Manuel; Polte, Julian; Kirsch, Lucas; Altmann, Ian; Emmerling, Roman |
Zeitschriftenaufsatz Journal Article |
| 2021 | White Paper »RESYST«. Resiliente Wertschöpfung in der produzierenden Industrie - innovativ, erfolgreich, krisenfest Buß, Dominik; Gebauer, Heiko; Glawar, Robert; Heller, Thomas; Klan, Steffen; Knothe, Thomas; Kohl, Holger; Sai, Brandon; Schmidtke, Niels; Stenzel, Fabian; Werner, Markus; Wilms, Marcel |
Bericht Report |
| 2021 | Towards Individualized Production with Flexible Shopfloor IT based on Distributed OPC UA Services Wolff, Tobias; Vick, Axel |
Konferenzbeitrag Conference Paper |
| 2021 | Enabling automated engineering's project progress measurement by using data flow models and digital twins Ebel, Helena; Riedelsheimer, Theresa; Stark, Rainer |
Zeitschriftenaufsatz Journal Article |
| 2021 | Schweißen unter Zug - LME-Eingangsprüfung für die Autoindustrie El-Sari, Bassel; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2021 | Deutsche Normungsroadmap Innovative Arbeitswelt Adolph, Lars; Albrecht, Philipp; Andersen, Thomas; Börkircher, Mikko; Meer, Jan de; Giertz, Jan-Paul; Jeske, Tim; Kagerer, Frank; Kirchhoff, Britta; Klimiont, Thomas; Minnerup, Jörg; Mühlbradt, Thomas; Müssigbrodt, Matthias; Orth, Ronald; Paproth, Yona; Preuße, Christoph; Richter, Christian; Schumacher, Simon; Senderek, Roman; Stock, Patricia; Tausch, Alina; Tegtmeier, Patricia; Ullrich, Carsten |
Bericht Report |
| 2021 | Reduction of erosion duration for electrical discharge drilling using a nature analogue algorithm with nested strategy types Uhlmann, Eckart; Polte, Mitchel; Streckenbach, Jan; Osmanovic, Mirsad |
Konferenzbeitrag Conference Paper |
| 2021 | Additives Fertigungs-Duo erleichtert Sensorintegration Uhlmann, Eckart; Polte, Julian; Neuwald, Tobias; Kersting, Robert; Brunner-Schwer, Christian |
Internetbeitrag Internet Contribution |
| 2021 | Machine Learning of Surface Layer Property Prediction for Milling Operations Uhlmann, Eckart; Holznagel, Tobias; Schehl, Philipp; Bode, Yannick |
Zeitschriftenaufsatz Journal Article |
| 2021 | 15. Berliner Runde. Neue Konzepte für Werkzeugmaschinen 2021. Begleitband | Tagungsband Conference Proceeding |
| 2021 | DRL-basierte Navigationsansätze in der industriellen Robotik Kästner, L.; Lambrecht, J.; Vick, A.; Krüger, J. |
Zeitschriftenaufsatz Journal Article |
| 2021 | On the Selection and Application of a Convenient Energy Management Software for Industrial Purposes Wurster, Larissa; Thiele, Gregor; Briese, Clemens; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2021 | Particle contact conditions for cutting edge preparation of micro-milling tools by the immersed tumbling process Uhlmann, Eckart; Polte, Julian; Kuche, Yves; Landua, Fabian |
Konferenzbeitrag Conference Paper |
| 2021 | Evaluation of carbon fiber reinforced polymer – CFRP – machining by applying industrial robots Grisol De Melo, Ever; Santos Silva, Jéssica Christina dos; Klein, Tiago Borsoi; Polte, Julian; Uhlmann, Eckart; Oliveira Gomes, Jefferson de |
Zeitschriftenaufsatz Journal Article |
| 2021 | Concept and Architecture for Information Exchange between Digital Twins of the Product (CPS) and the Production System (CPPS) Vogt, Anna; Müller, Ralph Klaus; Kampa, Thomas; Stark, Rainer; Großmann, Daniel |
Zeitschriftenaufsatz Journal Article |
| 2021 | A contribution to the interpretation of organizational resilience (Or) based on the analysis of key drivers and conceptual elements Hecklau, Fabian; Kidschun, Florian; Kohl, Holger; Hizal, Gamze Gül |
Konferenzbeitrag Conference Paper |
| 2021 | Cutting edge preparation of monolithic ceramic milling tools Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Hocke, Toni |
Konferenzbeitrag Conference Paper |
| 2021 | Fatigue recognition in overhead assembly based on a soft robotic exosuit for worker assistance Kuschan, J.; Krüger, J. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Titanium Ti-6Al-4V alloy milling by applying industrial robots Grisol de Melo, Ever; Mohnke, Christian; Polte, Julian; Oliveira Gomes, Jefferson de; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2021 | Universal identification and control of industrial manufacturing equipment as a service Tessaro, V.; Vick, A.; Krüger, J. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Towards Robust Object Detection and Pose Estimation as a Service for Manufacturing lndustries Rudorfer, Martin |
Dissertation Doctoral Thesis |
| 2021 | Methodological Procedure for the Development of a Qualitative and Quantitative Evaluation Concept for Project Benefit Assessment Hizal, Gamze Gül; Kohl, Holger |
Konferenzbeitrag Conference Paper |
| 2021 | Accuracy in force estimation applied on a piezoelectric fine positioning system for machine tools Uhlmann, Eckart; Polte, Mitchel; Triebel, Florian; Overbeck, Rasmus; Thom, Simon |
Zeitschriftenaufsatz Journal Article |
| 2021 | Application of tool electrodes oxidised with humid and dry air during the electro-discharge drilling of MAR-M247 alloy Uhlmann, Eckart; Polte, Mitchel; Streckenbach, Jan; Camin, Bettina; Chocholaty, Ondřej; Dinh, Ngoc Chuong |
Konferenzbeitrag Conference Paper |
| 2021 | Resilienz im strategischen Management produzierender Unternehmen. Konzeptpapier Schuh, Günther; Patzwald, Marc; Krebs, Leonie; Dumitrescu, Roman; Rasor, Rik; Sihn, Wilfried; Steinwender, Arko; Sala, Alessandro; Kohl, Holger; Knothe, Thomas; Singer, Katrin; Hecklau, Fabian |
Bericht Report |
| 2021 | Parameterentwicklung im L-PBF-Prozess Uhlmann, Eckart; Mühlenweg, Philipp Alexander |
Zeitschriftenaufsatz Journal Article |
| 2021 | Modeling of Contact Forces for Brushing Tools Uhlmann, Eckart; Hoyer, Anton |
Zeitschriftenaufsatz Journal Article |
| 2021 | Analysis and recycling of bronze grinding waste to produce maritime components using directed energy deposition Müller, Vinzenz; Marko, Angelina; Kruse, Tobias; Biegler, Max; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2021 | Improved surface generation of multi-material objects in computed tomography using local histograms Uhlmann, Eckart; Hein, Christoph; Kayser, Nicolas; Dürre, Gregor |
Konferenzbeitrag Conference Paper |
| 2021 | Internal Stress Evolution and Subsurface Phase Transformation in Titanium Parts Manufactured by Laser Powder Bed Fusion - An In Situ X-Ray Diffraction Study Schmeiser, Felix; Krohmer, Erwin; Schell, Norbert; Uhlmann, Eckart; Reimers, Walter |
Zeitschriftenaufsatz Journal Article |
| 2021 | Systematic Literature Review of System Models for Technical System Development Manoury, Marvin Michael; Zimmermann, Thomas; Stark, Rainer |
Review |
| 2021 | Quantitative and qualitative comparison of morphometric outcomes after endoscopic and conventional correction of sagittal and metopic craniosynostosis versus control groups Schulz, M.; Liebe-Püschel, L.; Seelbach, K.; Paulikat, L.; Fehlhaber, F.; Schwarz, K.; Blecher, C.; Thomale, U.-W. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Method for defect-free hybrid laser-arc welding of closed circumferential welds Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2021 | Progress for Life Cycle Sustainability Assessment by Means of Digital Lifecycle Twins - A Taxonomy Riedelsheimer, Theresa; Neugebauer, Sabrina; Lindow, Kai |
Aufsatz in Buch Book Article |
| 2021 | Production in the loop - the interoperability of digital twins of the product and the production system Vogt, Anna; Schmidt, Philipp Heiner; Mayer, Sebastian; Stark, Rainer |
Zeitschriftenaufsatz Journal Article |
| 2021 | Simulation and compensation of the thermal behaviour of industrial robots Uhlmann, Eckart; Polte, Julian; Mohnke, Christian |
Konferenzbeitrag Conference Paper |
| 2021 | Management, Design, and Implementation of Innovation Projects: Towards a Framework for Improving the Level of Automation and Digitalization in Manufacturing Systems van Erp, Tim; Rytter, Niels Gorm Malỳ; Sieckmann, Felix; Larsen, Mads Bruun; Blichfeldt, Henrik; Kohl, Holger |
Konferenzbeitrag Conference Paper |
| 2021 | Assistance Method for the Application-Driven Design of Machine Learning Algorithms Fono, Adalbert; Thiele, Gregor; Klein, Max; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2021 | Concept for an actuated variable tool electrode for use in sinking EDM Uhlmann, Eckart; Streckenbach, Jan; Thißen, Kai; Schulte Westhoff, Bela; Masoud, Abd Elkarim; Maas, Jürgen |
Konferenzbeitrag Conference Paper |
| 2021 | Improvements of hybrid laser arc welding for shipbuilding T-joints with 2F position of 8 mm thick steel Churiaque, C.; Sánchez-Amaya, J.M.; Üstündag, Ö.; Porrua-Lara, M.; Gumenyuk, A.; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2021 | Constructive compensation of the thermal behaviour for industrial robots Uhlmann, Eckart; Polte, Julian; Mohnke, Christian |
Konferenzbeitrag Conference Paper |
| 2021 | Precision finishing of additively manufactured components using the immersed tumbling process Polte, Julian; Polte, Mitchel; Hocke, Toni; Lahoda, Christian; Uhlmann, Eckart |
Konferenzbeitrag Conference Paper |
| 2021 | Inertial Measurement Unit based Human Action Recognition for Soft-Robotic Exoskeleton Kuschan, Jan; Burgdorff, Moritz; Filaretov, Hristo; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2021 | Steuerung von Laser-induzierten periodischen Oberflächenstrukturen Uhlmann, Eckart; Souza Schweitzer, Luiz Guilherme De; Schneider, Peter; Michel, Andre; Hein, Christoph |
Zeitschriftenaufsatz Journal Article |
| 2021 | Practical methods for avoidance of liquid metal embrittlement in resistance spot welds of advanced high strength steels Boehne, Christoph; Biegler, Max |
Vortrag Presentation |
| 2021 | Artefaktkorrektur für die 3D-Röntgenbildgebung auf Basis synthetischer Röntgenprojektionen Melnik, Steffen |
Dissertation Doctoral Thesis |
| 2021 | Situation Awareness Monitor And Liquidity Assessment For Enterprise Resilience Management Scholz, Julia Anne; Oertwig, Nicole; Delleske, Caroline; Fischer, Kai; Knothe, Thomas; Stolz, Alexander; Kohl, Holger |
Konferenzbeitrag Conference Paper |
| 2021 | Supervised learning vs. unsupervised learning: A comparison for optical inspection applications in quality control Lehr, Jan; Philipps, Jan; Nguyen Hoang, Vuong Minh; von Wrangel, D.; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2021 | Development of a Conceptual Understanding of the term Technological Capability Hecklau, Fabian; Kidschun, Florian; Kohl, Holger; Hizal, Gamze Gül |
Konferenzbeitrag Conference Paper |
| 2021 | Reduction of annotation efforts for multiclass object detection by using a domain awareness data combination strategy Briese, Clemens; Hummel, B.; Hoang, Vietnguyen; Schlüter, Marian; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2021 | Sensor integration in hybrid additive manufactured parts for real-time monitoring in turbine operations Uhlmann, Eckart; Polte, Julian; Kersting, Robert; Brunner-Schwer, Christian; Neuwald, Tobias |
Konferenzbeitrag Conference Paper |
| 2021 | Production environment of tomorrow (ProMo) Kuschan, Jan; Müller, Vinzenz; Monchinger, Stephan; Heimann, Oliver; Niebuhr, Carsten; Kabha, Oday |
Konferenzbeitrag Conference Paper |
| 2021 | Time-Sensitive Networking over Metropolitan Area Networks for Remote Industrial Control Tschöke, Simon; Lynker, Frederic; Buhr, Hauke; Schreiner, Florian; Willner, Alexander; Vick, Axel; Chemnitz, Moritz |
Konferenzbeitrag Conference Paper |
| 2021 | Verbesserung der Vorhersagegüte von künstlichen neuronalen Netzen zum Widerstandspunktschweißen durch Auswertung des dynamischen Widerstands El-Sari, Bassel; Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2021 | KPI for the Evaluation of Growth Scenarios for the Strategic Organizational Development Budde, Felix; Orth, Ronald; Förster, Lars |
Konferenzbeitrag Conference Paper |
| 2021 | Methodology to develop Digital Twins for energy efficient customizable IoT-Products Riedelsheimer, Theresa; Gogineni, Sonika; Stark, Rainer |
Zeitschriftenaufsatz Journal Article |
| 2021 | Relative density prognosis for directed energy deposition with the help of artificial neural networks Marko, A.; Schafner, A.; Raute, J.; Rethmeier, M. |
Zeitschriftenaufsatz Journal Article |
| 2021 | Fully coupled wet cylindrical turning simulation using the Finite-Pointset-Method Uhlmann, Eckart; Barth, Enrico; Quellhorst, Alexander; Seifarth, Tobias; Kuhnert, Jörg; Nabbout, Kaissar; Sommerfeld, Martin |
Zeitschriftenaufsatz Journal Article |
| 2021 | Selbstoptimierendes System zur aktiven Schwingungskompensation in Werkzeugmaschinen Mewis, Jan |
Dissertation Doctoral Thesis |
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica
This list has been generated from the publication platform Fraunhofer-Publica
2020
| Jahr Year | Titel/Autor:in Title/Author | Publikationstyp Publication Type |
|---|---|---|
| 2020 | Online process control and self-configuration of turning operations Uhlmann, Eckart; Holznagel, Tobias; Alavi, Raheel Masood |
Zeitschriftenaufsatz Journal Article |
| 2020 | Firma Klappdekelen - die Digitalisierungshürde lässt sich "Meister(n)" Schumann, Monique |
Aufsatz in Buch Book Article |
| 2020 | DEM-simulation of particle behaviour during cutting edge preparation of micro-milling tools by immersed tumbling Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Kuche, Yves |
Konferenzbeitrag Conference Paper |
| 2020 | Dry-ED milling of micro-scale contours with high-speed rotating tungsten tube electrodes Uhlmann, Eckart; Perfilov, I.; Yabroudi, Sami; Mevert, Ricardo; Polte, Mitchel |
Zeitschriftenaufsatz Journal Article |
| 2020 | Management von Innovationsnetzwerken unter Fokussierung von Kollaboration Cap, Jan-Patrick |
Dissertation Doctoral Thesis |
| 2020 | Hybrid-Prototype-in-the-Loop zum frühzeitigen Test der Beherrschbarkeit von Fahrerassistenzsystemen Buchholz, Christian |
Dissertation Doctoral Thesis |
| 2020 | Laser-Plasma-Auftragschweißen als hybrides Beschichtungsverfahren für hohe Auftragsraten mit geringer thermischer Belastung. Abschlussbericht Brunner-Schwer, Christian |
Bericht Report |
| 2020 | Avoidance of liquid metal embrittlement during resistance spot welding by heat input dependent hold time adaption Böhne, C.; Meschut, G.; Biegler, M.; Rethmeier, M. |
Zeitschriftenaufsatz Journal Article |
| 2020 | Impact of Platform Openness on Ecosystems and Value Streams in Platform-Based PSS Exemplified Using RAMI 4.0 Zambetti, Michaela; Blüher, Till; Pezzotta, Giuditta; Exner, Konrad; Pinto, Robert; Stark, Rainer |
Konferenzbeitrag Conference Paper |
| 2020 | Augmented learning for industrial education Menn, Jan Philipp; Severengiz, Mustafa; Lorenz, Andrea Katherija; Wassermann, Jonas; Ulbrich, Carsten; Krüger, Jörg; Seliger, Günther |
Zeitschriftenaufsatz Journal Article |
| 2020 | Standardisation of Practices in Open Source Hardware Bonvoisin, Jérémy; Molloy, Jenny; Häuer, Martin; Wenzel, Tobias |
Zeitschriftenaufsatz Journal Article |
| 2020 | An optimal algorithm for the robotic assembly system design problem: An industrial case study Hagemann, S.; Stark, R. |
Zeitschriftenaufsatz Journal Article |
| 2020 | Laser welding of Inconel 718 nickel-based alloy layer-by-layer products Voropaev, Alexander; Stramko, Maxim; Sorokin, Alexander; Logachev, Ivan; Kuznetsov, Mikhail; Gook, Sergej |
Zeitschriftenaufsatz Journal Article |
| 2020 | Reproduzierbare Optimierung des funkenerosiven Bohrens Uhlmann, Eckart; Polte, Mitchel; Streckenbach, Jan; Osmanovic, Mirsad; Börnstein, Julian |
Zeitschriftenaufsatz Journal Article |
| 2020 | On the relationship between the bulge effect and the hot cracking formation during deep penetration laser beam welding Artinov, A.; Bachmann, M.; Meng, X.; Karkhin, V.; Rethmeier, M. |
Zeitschriftenaufsatz Journal Article |
| 2020 | Effectivity of Learning Factories to convey problem solving competencies Sieckmann, Felix; Petrusch, Natalie; Kohl, Holger |
Zeitschriftenaufsatz Journal Article |
| 2020 | User centered development of a digital twin concept with focus on sustainability in the clothing industry Riedelsheimer, Theresa; Dorfhuber, Lisa; Stark, Rainer |
Zeitschriftenaufsatz Journal Article |
| 2020 | Model-Based Systems Engineering (MBSE) as computer-supported approach for cooperative systems development Schmidt, Marvin M.; Stark, Rainer |
Konferenzbeitrag Conference Paper |
| 2020 | In situ determination of the critical straining condition for solidification cracking during laser beam welding Bakir, N.; Gumenyuk, A.; Pavlov, V.; Volvenko, S.; Rethmeier, M. |
Zeitschriftenaufsatz Journal Article |
| 2020 | Wear evaluation of CVD diamond coated high-performance drilling tools for machining of carbon fiber reinforced plastics (CFRP) Uhlmann, Eckart; Reimers, Walter; Hinzmann, Daniel; Christiansen, Gerret; Böttcher, Katrin |
Zeitschriftenaufsatz Journal Article |
| 2020 | Efficient abrasive water jet milling for near-net-shape fabrication of difficult-to-cut materials Uhlmann, Eckart; Männel, Constantin; Braun, Thomas |
Zeitschriftenaufsatz Journal Article |
| 2020 | Hybrid laser-arc welding of thick-walled pipe segments with optimization of the end crater Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2020 | Increasing challenges for sustainability for manufacturing industry based on global, national and technological initiatives Kohl, Holger; Schliephack, Wolf; Muschard, Bernd |
Zeitschriftenaufsatz Journal Article |
| 2020 | Learning factory for digitization of enterprises Rieckmann, Jens Mathis; Knothe, Thomas |
Konferenzbeitrag Conference Paper |
| 2020 | Development of Tool Paths for Multi-axis Single Stage Incremental Hole-flanging Besong, Lemopi Isidore; Buhl, Johannes; Ünsal, Ismail; Bambach, Markus; Polte, Mitchel; Blumberg, Julian; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2020 | Issues in distributed Engineering of SMEs over the Collaboration Life Cycle Blüher, Till; Randermann, Marcel; Rosa, Maiara; Stark, Rainer; Jochem, Roland |
Zeitschriftenaufsatz Journal Article |
| 2020 | Maturity Assessment in Industry 4.0 - A Comparative Analysis of Brazilian and German Companies Moura, Luciano Raizer; Kohl, Holger |
Zeitschriftenaufsatz Journal Article |
| 2020 | Firma Klappdekelen - ein Jahr später Schumann, Monique |
Aufsatz in Buch Book Article |
| 2020 | Potentials and challenges of Smart Products and related business models Wang, Wei Min; Lünnemann, Pascal; Klemichen, Antje; Blüher, Till; Stark, Rainer |
Konferenzbeitrag Conference Paper |
| 2020 | Towards Deep Learning in Industrial Applications Taking Advantage of Service-Oriented Architectures Briese, C.; Schlüter, M.; Lehr, J.; Maurer, K.; Krüger, J. |
Zeitschriftenaufsatz Journal Article |
| 2020 | Development of monolithic ceramic milling tools for machining graphite Uhlmann, Eckart; Polte, Mitchel; Polte, Julian; Kuche, Yves; Hocke, Toni |
Konferenzbeitrag Conference Paper |
| 2020 | Pressure conditions during the immersed tumbling process Uhlmann, Eckart; Polte, Julian; Polte, Mitchel; Kuche, Yves |
Konferenzbeitrag Conference Paper |
| 2020 | Deutsche Normungsroadmap Künstliche Intelligenz Adler, R.; Kolomiichuk, Sergii; Hecker, Dirk; Lämmel, Philipp; Ma, Jackie; Marko, Angelina; Mock, Michael; Nagel, Tobias; Poretschkin, Maximilian; Rennoch, Axel; Röhler, Marcus; Ruf, Miriam; Schönhof, Raoul; Schneider, Martin A.; Tcholtchev, Nikolay; Ziehn, Jens; Böttinger, Konstantin; Jedlitschka, Andreas; Oala, Luis; Sperl, Philip; Wenzel, Markus; et al. |
Studie Study |
| 2020 | Automated Tool-Path Generation for Rapid Manufacturing of Additive Manufacturing Directed Energy Deposition Geometries Biegler, Max; Wang, Jiahan; Kaiser, Lukas; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2020 | Haptic Interaction in Virtual Reality Environments for Manual Assembly Validation Kind, Simon; Geiger, Andreas; Kießling, Nora; Schmitz, Michael; Stark, Rainer |
Zeitschriftenaufsatz Journal Article |
| 2020 | Revisiting the intellectual capital research landscape: A systematic literature review Hussinki, H.; Garanina, T.; Dumay, J.; Steinhöfel, E. |
Aufsatz in Buch Book Article |
| 2020 | KI-gestützte Bildverarbeitung für Industrieanwendungen Lehr, Jan |
Zeitschriftenaufsatz Journal Article |
| 2020 | Assistenzsystem für die Entwicklung nachhaltiger Produkte Buchert, Tom |
Dissertation Doctoral Thesis |
| 2020 | Geometric distortion-compensation via transient numerical simulation for directed energy deposition additive manufacturing Biegler, Max; Elsner, B.A.M.; Graf, B.; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2020 | Simulation of metal cutting with cutting fluid using the Finite-Pointset-Method Uhlmann, Eckart; Barth, Enrico; Seifarth, Tobias; Höchel, Maximilian; Kuhnert, Jörg; Eisenträger, Almut |
Konferenzbeitrag Conference Paper |
| 2020 | System identification of a hysteresis-controlled pump system using SINDy Thiele, Gregor; Fey, Arne; Sommer, David; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2020 | Distortion-based validation of the heat treatment simulation of Directed Energy Deposition additive manufactured parts El-Sari, Bassel; Biegler, Max; Graf, B.; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2020 | Definition von Schwingungsparametern und Ermittlung der Auswirkungen bei der Bearbeitung Uhlmann, Eckart; Zimmermann, Sascha; Thalau, Janis |
Zeitschriftenaufsatz Journal Article |
| 2020 | Digital Twin Readiness Assessment Riedelsheimer, Theresa; Lünnemann, Pascal; Wehking, Sebastian; Dorfhuber, Lisa |
Studie Study |
| 2020 | Conceptualization of a Measurement Procedure for Determination of Characteristic Properties of SLM Produced Parts by Means of Computed Tomography Uhlmann, Eckart; Saber, Yassin |
Zeitschriftenaufsatz Journal Article |
| 2020 | Determining the shape of reflectance reference samples for curved surface reflectors Lanevski, Dmitri; Manoocheri, Farshid; Vaskuri, Anna; Hameury, Jaques; Kersting, Robert; Monte, Christian; Adibekyan, Albert; Kononogova, Elena; Ikonen, Erkki |
Zeitschriftenaufsatz Journal Article |
| 2020 | Optimization with the evolution strategy by example of electrical-discharge drilling Streckenbach, Jan; Koref, Ivan Santibáñez; Rechenberg, Ingo; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2020 | Networked Visual Servoing as Use-Case for Cloud-based Industrial Robot Control Vick, Axel; Krause, Christian; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2020 | Towards a Reference Model for Knowledge Driven Data Provision Processes Wang, Wei Min; Preidel, Maurice; Fachbach, Bernd; Stark, Rainer |
Konferenzbeitrag Conference Paper |
| 2020 | Experimental and numerical study on the influence of the laser hybrid parameters in partial penetration welding on the solidification cracking in the weld root Bakir, N.; Üstündag, Ö.; Gumenyuk, A.; Rethmeier, M. |
Zeitschriftenaufsatz Journal Article |
| 2020 | Reduktion thermisch bedingter Verlagerungen durch Integration von Peltierelementen in eine Hochfrequenzmotorspindel Uhlmann, Eckart; Salein, Sebastian; Iden, Nico; Polte, Julian; Temme, Peter; Hartung, Dimitri; Perschewski, Svetlana |
Zeitschriftenaufsatz Journal Article |
| 2020 | Modelling of a thermoelectric self-cooling system based on thermal resistance networks for linear direct drives in machine tools Uhlmann, Eckart; Salein, Sebastian; Polte, Mitchel; Triebel, Florian |
Zeitschriftenaufsatz Journal Article |
| 2020 | Evaluation Model for Mobility Design of Learning Factories Petrusch, Natalie; Schliephack, Wolf; Kohl, Holger |
Zeitschriftenaufsatz Journal Article |
| 2020 | Increased efficiency and accuracy in ultra-precision machining through adapted CAM software Uhlmann, Eckart; Polte, Julian; Hein, Christoph; Kuche, Yves; Dörr, Martin |
Konferenzbeitrag Conference Paper |
| 2020 | Neueste Entwicklungen im Bereich des Hochleistungslaserstrahl- und Hybridschweißens von hohen Blechdicken Üstündag, Ömer; Bakir, Nasim; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2020 | Qualification of computational welding mechanics approaches for simulation of directed energy deposition Biegler, Max Robert |
Dissertation Doctoral Thesis |
| 2020 | Integrated enterprise modelling to achieve interoperability Jäkel, Frank-Walter |
Konferenzbeitrag Conference Paper |
| 2020 | IoT-T Rennoch, Axel; Jäkel, Frank-Walter; Hackel, Sascha; Stomber, Jens; Stölzle, Stefan; Wardaschka, Andre; Kaiser, Alexander |
Bericht Report |
| 2020 | Prozessmanagement für KMU Oertwig, Nicole; Gering, Patrick; Knothe, Thomas |
Aufsatz in Buch Book Article |
| 2020 | Digitalisation toolkit for SMEs Gering, Patrick |
Konferenzbeitrag Conference Paper |
| 2020 | Design and hard machining of a high performance ceramic impeller Uhlmann, Eckart; Polte, Julian; Koprowski, S; Kochan, Jaroslaw; Borsoi Klein, T. |
Konferenzbeitrag Conference Paper |
| 2020 | Quantifying mechanical properties of automotive steels with deep learning based computer vision algorithms Javaheri, E.; Kumala, V.; Javaheri, A.; Rawassizadeh, R.; Lubritz, J.; Graf, B.; Rethmeier, M. |
Zeitschriftenaufsatz Journal Article |
| 2020 | Boron-doped monocrystalline diamond as cutting tool for temperature measurement in the cutting zone Uhlmann, Eckart; Polte, Julian; Polte, Mitchel; Hocke, T. |
Konferenzbeitrag Conference Paper |
| 2020 | Process data based Anomaly detection in distributed energy generation using Neural Networks Klein, Max; Thiele, Gregor; Fono, Adalbert; Khorsandi, Niloufar; Schade, David; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2020 | Serious Game on Factory Planning for Higher Education Severengiz, Mustafa; Seliger, Günther; Krüger, Jörg |
Zeitschriftenaufsatz Journal Article |
| 2020 | Modular virtual reality to enable efficient user studies for autonomous driving Konkol, Kathrin; Brandenburg, Elisabeth; Stark, Rainer |
Konferenzbeitrag Conference Paper |
| 2020 | Verfahren zum fehlerfreien Laserstrahl-Hybridschweißen von geschlossenen Rundnähten Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2020 | Literature review: Impact assessment of research and technology organizations Kidschun, Florian; Hecklau, Fabian; Kohl, Holger; Sarikaya, B. |
Konferenzbeitrag Conference Paper |
| 2020 | Handlungsempfehlungen Schneider, Benjamin; Kayser, Marco; Gelec, Erdem; Schweizer, Hartmut; Knothe, Thomas |
Aufsatz in Buch Book Article |
| 2020 | Einflussgrößen des Schärfens beim Doppelseitenplanschleifen mit Planentenkinematik Lichtschlag, Linus; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2020 | Preclinical In Vitro Assessment of Submicron-Scale Laser Surface Texturing on Ti6Al4V Souza Schweitzer, Luiz Guilherme De; Cunha, Alexandre; Pereira, Thiago; Mika, Kerstin; Rego, Ana Maria P. L. R. Botelho Do; Ferraria, Ana Maria; Kieburg, Heinz; Geißler, Sven; Uhlmann, Eckart; Schoon, Janosch |
Zeitschriftenaufsatz Journal Article |
| 2020 | Wear behaviour of various CVD diamond thick film specifications during turning Ti-6Al-4V Uhlmann, Eckart; Schröter, Danny |
Konferenzbeitrag Conference Paper |
| 2020 | Verfügbarkeitssteigerung durch gezielte Datenanalyse Uhlmann, E. |
Zeitschriftenaufsatz Journal Article |
| 2020 | Organizational planning for quality management in the digital age Behmer, Falk Johannes; Jochem, Roland |
Zeitschriftenaufsatz Journal Article |
| 2020 | A comparative analysis of ceramic and cemented carbide end mills Dröder, Klaus; Karpuschewski, Bernhard; Uhlmann, Eckart; Arrabiyeh, Peter A.; Berger, Daniek; Busemann, Sarah; Hartig, Jörg; Madanchi, Nadine; Mahlfeld, Georg; Sommerfeld, Christian |
Zeitschriftenaufsatz Journal Article |
| 2020 | Avoidance of end crater imperfections at high-power laser beam welding of closed circumferential welds Gook, Sergej; Üstündag, Ömer; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2020 | Modellierung mit MO²GO und Erzeugung eines IEC-konformen Datenoutputs Schweizer, Hartmut; Gering, Patrick |
Aufsatz in Buch Book Article |
| 2020 | Automated continuous learn and improvement process of energy efficiency in manufacturing Can, Alperen; Fisch, Jessica; Stephan, Philipp; Thiele, Gregor; Krüger, Jörg |
Konferenzbeitrag Conference Paper |
| 2020 | Numerische Simulation im 3D-Druck. Simulationsgestützte Verzugskompensation reduziert den Nachbearbeitungsaufwand und vermeidet Bauabbrüche im DED Additive Manufacturing Biegler, Max; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2020 | Untersuchung zum Elektronenstrahlschweißen heißrissgefährdeter Nickelbasis-Superlegierungen mittels statistischer Versuchsplanung Raute, Julius; Jokisch, Torsten; Marko, Angelina; Rethmeier, Michael |
Konferenzbeitrag Conference Paper |
| 2020 | Einsatzverhalten keramischer Fräswerkzeuge bei der Zerspanung von glas- und kohlenstofffaserverstärkten Kunststoffen Stawiszynski, Bartek |
Dissertation Doctoral Thesis |
| 2020 | Trochoid milling with industrial robots Uhlmann, Eckart; Reinkober, S.; Hoffmann, M.; Käpernick, P. |
Zeitschriftenaufsatz Journal Article |
| 2020 | Applying Contextualization for Data-Driven Transformation in Manufacturing Gogineni, Sonika; Lindow, Kai; Nickel, Jonas; Stark, Rainer |
Konferenzbeitrag Conference Paper |
| 2020 | Ursachenanalyse zur Verfügbarkeitssteigerung von Werkzeugmaschinen Uhlmann, Eckart; Dumitrescu, Roman; Polte, Julian; Meyer, Maurice; Simsek, Deniz |
Zeitschriftenaufsatz Journal Article |
| 2020 | Constant surface roughness over tool-lifetime due to online process monitoring and cutting parameter adaption in turning of gear steel Uhlmann, Eckart; Holznagel, Tobias; Berardi, Patrick |
Zeitschriftenaufsatz Journal Article |
| 2020 | Smart hybrid prototyping in manual automotive assembly validation Wolf, Bernhard; Kind, Simon; Stark, Rainer |
Zeitschriftenaufsatz Journal Article |
| 2020 | Research on new energy automobile manufacturing service derivatization based on TRIZ Wan, Hui; Rieckmann, Jens Mathis; Zhang, Qianqian; Ping, Qiao |
Zeitschriftenaufsatz Journal Article |
| 2020 | Oxidized tool electrodes for optimized electro-discharge drilling Uhlmann, Eckart; Polte, Mitchel; Streckenbach, Jan; Dinh, Ngoc Chuong; Börnstein, Julian; Wolf, Cora-Sophia; Camin, Bettina |
Konferenzbeitrag Conference Paper |
| 2020 | Systematic literature review - Effects of PSS on sustainability based on use case assessments Blüher, Till; Riedelsheimer, Theresa; Gogineni, Sonika; Klemichen, Antje; Stark, Rainer |
Zeitschriftenaufsatz Journal Article |
| 2020 | Electrical discharge dressing of honing stones Uhlmann, Eckart; Yabroudi, Sami; Zimmermann, Sascha; Gerlitzky, Georg; Polte, Mitchel; Klink, Ulrich; Sihling, Bernd |
Zeitschriftenaufsatz Journal Article |
| 2020 | Network of innovation brokers: Fostering transnational STI Haunschild, J.; Tsog, S. |
Konferenzbeitrag Conference Paper |
| 2020 | Decentralised identification of used exchange parts with a mobile application Lehr, Jan; Schlüter, Marian; Krüger, Jörg |
Zeitschriftenaufsatz Journal Article |
| 2020 | Hybrid laser arc welding of thick high-strength pipeline steels of grade X120 with adapted heat input Üstündag, Ömer; Gook, Sergej; Gumenyuk, Andrey; Rethmeier, Michael |
Zeitschriftenaufsatz Journal Article |
| 2020 | Mechanical Properties Characterization of Welded Automotive Steels Javaheri, E.; Lubritz, J.; Graf, B.; Rethmeier, M. |
Zeitschriftenaufsatz Journal Article |
| 2020 | Prozessüberwachung durch Objekterkennung - Automatisierte Werkzeugverschleißmessung beim robotergeführten Gleitschleifen Kopp, Marco; Uhlmann, Eckart |
Zeitschriftenaufsatz Journal Article |
| 2020 | Veränderte Kompetenzanforderungen im Rahmen von Digitalisierung und Industrie 4.0 Hecklau, F.; Orth, R.; Kidschun, F.; Tominaj, S. |
Konferenzbeitrag Conference Paper |
| 2020 | Application of additive manufactured tungsten carbide-cobalt electrodes with interior flushing channels in S-EDM Uhlmann, Eckart; Polte, Julian; Bolz, Robert; Yabroudi, Sami; Streckenbach, Jan; Bergmann, André |
Zeitschriftenaufsatz Journal Article |
| 2020 | Characteristics and Skills of Leadership in the Context of Industry 4.0 Guzmán, Valeria E.; Muschard, Bernd; Gerolamo, Mateus; Kohl, Holger; Rozenfeld, Henrique |
Zeitschriftenaufsatz Journal Article |
| 2020 | UrbanTSN - Automatisierung mit Echtzeit-Internet Chemnitz, Moritz; Wolff, Tobias; Vick, Axel |
Zeitschriftenaufsatz Journal Article |
| 2020 | Analyzing the role of research and technology organizations (RTOs) in national innovation systems (NIS) Hecklau, Fabian; Kidschun, Florian; Kohl, Holger; Tominaj, S. |
Konferenzbeitrag Conference Paper |
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica
This list has been generated from the publication platform Fraunhofer-Publica